Tender Detail

Tender Details

  • Company Dire Dawa University
  • Address Dire Dawa Ethiopia, Phone: +251987347711
  • Websitehttps://www.ddu.edu.et/
  • Deadline08 May 2024, 9:00 AM
  • magazineEGP
  • CountryEthiopia
  • Official noticeproduction.egp.gov.et
  • Bid Document PriceNot stated in the notice
  • Bid Security500000
  • opening date2024-05-08 09:30:00
  • Categories System Supply And Installation

lot 1 Procurement of Supply and Implementation of Smart Classroom, Campus Gate Access Control System & Information Release System

Dire Dawa University


Tender Information

Titlelot 1 Procurement of Supply and Implementation of Smart Classroom, Campus Gate Access Control System & Information Release System
Descriptionlot 1 Procurement of Supply and Implementation of Smart Classroom, Campus Gate Access Control System & Information Release System
Procuring EntityDire Dawa University
Reference NoDDU-NCB-G-0022-2016-BID
Procurement MethodOpen
Submission Deadline2024-05-08 09:00:00
Invitation Date2024-03-27 00:00:00
Procurement TypeBidding
Award Typetwo envelop

Contact Information

Physical Address:Dire Dawa, Room 2nd floor no 4
Dire Dawa, Ethiopia
Contact Details:Tel: +251 54110601
Email: Dereje.wubishet@ddu.eduu.et
Mailing Address:P.O. Box 1362, Postal Code: 3000

TechnicalQualification

  • •Technical Qualifications, Competence, and Experience of the Bidder (ITB Clause 16): (a).   The Bidder has successfully completed at least [insert required number of contracts] three contracts with a budget of at least one times equal to that of this contract in the past three years;(b).   History of non-performing contracts - Non-performance of a contract did not occur within the last [insert required number of years] years prior to the deadline for Bid submission, based on all information on fully settled disputes or litigation. A fully settled dispute or litigation is one that has been resolved in accordance with the Dispute Resolution Mechanism under the respective contract, and where all appeal instances available to the bidder have been exhausted.(c).   Pending litigation - All pending litigation shall in total not represent more than [insert required percent] 30 percent of the Bidder’s net worth and shall be treated as resolved against the Bidder.

    (Ref: Technical Qualifications, Competence, and Experience of the Bidder (ITB Clause 16))
  • •Submission of Delivery and Completion Schedule :

    Bidder has to submit Delivery and Completion Schedule presented as per template in Section 6, Statement of Requirements

    (Ref: 37.4 (e) )
  • •Submission of Description of the organization of the warranty offered :

    Bidder has to submit Description of the organization of the warranty offered in accordance with the conditions laid down in GCC Clause 23

    (Ref: 37.4 (d) (ii) )
  • •Completion of Technical Specification + Technical Offer+ Compliance Sheet Form:

    Bidder has to complete its Technical Specification + Technical Offer+ Compliance Sheet Form in accordance with technical specification presented as per template in Section 6, Statement of Requirements and submit the following mandatory attachments

    (Ref: 37.4 (d). )
  • •Origin of the Goods and Related Services offered:

    Bidder has to provide in the Bid Submission Sheet Form the Statement attesting the origin of the Goods and Related Services offered

    (Ref: 37.4 (a). )
  • •Submission of Descriptive technical literature :

    Bidder has to submit Descriptive technical literature in accordance with ITB Clause 17

    (Ref: 17 & 37.4 (d)(i) )
  • •Submission of Manufacturer Authorization Letter :

    Bidder has to submit Manufacturer Authorization Letter in accordance with ITB Clause 5.6

    (Ref: 5.6 & 37.4 (d) (iii) )
  • •Major relevant contracts successfully completed :

    Bidder has to provide in the Bidder Certification of Compliance Form information about major relevant contracts successfully completed in the number and period specified in the BDS

    (Ref: 37.4 (b). )
  • •Submission of Certificates of satisfactory execution of contracts :

    Bidder has to submit Certificates of satisfactory execution of contracts provided by contracting parties to the contracts successfully completed in the period and budget as specified in the BDS Clause 16.3

    (Ref: 37.4 (c). )

FinancialQualification

  • •1.3 Financial Standing of the Bidder (ITB Clause 15): (a).   The average annual turnover calculated as total certified payments received for contracts in progress or completed within the last [insert number of years]three years must exceed [insert required figure] 1.5 times the amount of the financial proposal of the Bid;(b).   Credit Facility is required at least 10% of the amount of the financial proposal of the Bid. [insert additional criterion].

    (Ref: 1.3 Financial Standing of the Bidder (ITB Clause 15))
  • •Documents proofing bidder financial standing:

    Bidder has to submit other documents proofing its financial standing, as required in the BDS Clause 15.2(b)

    (Ref: 37.5 (b). )
  • •Average annual turnover :

    The average annual turnover for the period specified in Section 3, Evaluation Methodology and Criteria does not exceed the amount of the financial proposal of the Bid in value specified in the BDS

    (Ref: 37.5 (c). )
  • •Submission of Financial Statements:

    Bidder has to submit financial statements certified by an independent auditor as required in ITB Clause 15.2(a) for the period specified in Section 3, Evaluation Methodology and Criteria

    (Ref: 15.2 (a))

PerformanceQualification

  • •Chapter 6: Statement of Requirements: Chapter 6: Statement of RequirementsIntroduction

    National attention is given to the expansion and improvement of higher education institutions as one of the critical factors and actors in development of the country has explicit and implied requirements for the use of ICT facilities, systems and services in realizing visions and mission critical objectives.

    Dire Dawa University’s role as a major contributor and enabler to the expansion and enhancement efforts, along with the imperatives contained in its own ambitious strategic plan, call for speedy improvement of the efficiency and quality of its academic and administrative functions. This is hard, if not impossible, to accomplish without adequate ICT support as institutional transforming tool.

    This tender is, therefore, for the Supply and Implementation of Smart Classroom, Campus Gate Access Control System & Information Release System for Dire-Dawa University. 

    Accordingly, Dire Dawa University invites interested, qualified and experienced firms to submit their proposal on Turnkey Basis.

    Background

    As explained, in order to achieve the goal of providing high-quality and relevant education, cultivating high-skilled talents needed for national transformation, and producing and disseminating problem-solving knowledge through relevant research and innovation, Dire Dawa University is investing substantial resources in education and teaching, campus safety, etc. direction.

    The university currently has valuable resources. With all these resources at your disposal, it would be unwise not to have the most advanced security systems that the technology world can currently offer. When people think about the dangers our world faces this time, protecting our universities and entire infrastructure and data should be top of mind. On the contrary, the traditional access control security system currently used by Dire Dawa is simply unreliable. This situation therefore requires the establishment of a new and reliable security system that guarantees the safety and sustainability of the assets owned by the Authority, which in turn determines the safety of the public and the level of trust in our government personnel, research Personnel, lecturers and students will own the Authority.

    In this regard, we plan to continue to improve campus safety and on-campus education and teaching in this project. In this bidding, we will focus on upgrading and transforming from three aspects:

    ·        Part 1: Campus Gate Access Control System

    ·        Part 2: Campus Information Release System

    ·        Part 3: Smart Classroom

    This tender has been prepared by Dire Dawa University for Campus Gate Access Control System, Information release system and Smart classroom material supply, hardware and cabling installation, renovation works, system configuration and training work. All materials required for this project will be provided by the bidder, and the bidder is expected to use its manpower, installation and configuration tools to install and implement this project within the specified scope. The University therefore invites interested, experienced and qualified companies to come up with their solution.

    Purpose

    Part 1: Campus gate access control management system

    ü Combined with the existing campus card system of the campus, create campus personnel and vehicle access control management, visitor authentication, prohibited items inspection, etc., and combine the personnel biometric information (face, fingerprint, card information, etc.) obtained by the campus card system to establish a campus personnel information database.

    ü Automated rule-based management of access control & Managed, interlinking with SIMS and integration with departmental operations application. Eventual replacement of traditional manual based, verification, identity and Authentication and interrelating security service to modern high-end integrated security solution.

    ü Combined with the solar power backup system, to ensure that the system 7 * 24 operation

    ü To provide training that can develop physical security awareness and create capacity to formulate and implement required policies.

    Part 2: Campus information release system

    ü Use outdoor information display on campus to promptly issue campus notices to students, teachers, and administrators, such as holiday notices, emergency notices, celebration notices, live event transmission etc.

    ü Use outdoor information display on campus to streaming live videos of major campus celebrations to tourists, visitors and University Communities.

    ü Any live streaming can be pushed to multiple live streaming platforms with one click.

    Part 3: Smart Classroom

    ü Provide students with a better learning environment through the construction of smart classrooms and create an "online + offline" integrated operation model. The smart classroom must have a recording function

    ü Create a campus online learning portal, which can not only provide students with online learning course resources, but also include management of students’ learning situations, including but not limited to: Interactive classroom management, Appointment management, Resource management, Live streaming on campus, Rating management, Leave management, Attendance management, announcement, Score management, Student comprehensive quality evaluation

    Scope of the Work

    This request for proposals includes the material supply, installation, configuration, commissioning and training for Campus access control system, Information release system and Smart classroom. The scope of work is as follows but not limited to:

    General scope of work

    ·        detail design physical topology and architecture.

    ·        Supply installation materials

    ·        Label and document for equipment in detail.

    ·        Complete acceptance tests reports.

    ·        The winner of the turnkey projects is expected to provide a document that can serve as a directory or manual for Campus access control system, Information release system and Smart classroom. All activities undertaken should also be documented and submitted at the end of the installation and completion of the work.

    ·        The work done under this contract shall be in compliance with applicable standards, statutory regulations, and safety requirements in force at the date of award of this contract.

    ·        The bidder uses its own toolkit and tools deemed necessary for the job.

    ·        Site acceptance tests to establish the satisfactory performance of the equipment's as per requirements.

    Detailed scope of workMaterial supply

    ü Supply material based on the BOM specified.

    Installation and configuration

    ü Based on the University statements of requirements

     

    Part 1: Campus gate access control management

    1)       Entry and exit vehicle control system

    ü Vehicle barrier and Pole installation and configuration

    ü Anti-smash radar installation and configuration

    ü Entrance and exit cameras installation and configuration

    ü LED display installation and configuration

    ü Network cables and connectors, Power cables and connectors installations is bidder’s responsibility

    2)       Sidewalk gate system

    ü Sidewalk gate installation and configuration

    ü Face/Fingerprint/Card Terminal for the speed gate above installation and configuration

    ü Network cables and connectors, Power cables and connectors installations is bidder’s responsibility

    ü Installing and configuring all IP camera

    3)       Visitor authentication system

    ü Visitor Terminal installation and configuration

    ü Baggage security checker installation and configuration

    ü Security inspection machine monitor table installation and configuration

    ü Security gate installation and configuration

    ü Security machine entrance table installation and configuration

    ü Network cables and connectors, Power cables and connectors installations is bidder’s responsibility

    4)       Management system and network

    ü Rack, Switch Sever installation and configuration.

    ü Management software configuration

    5)       Solar power system

    ü Photovoltaic bracket installation and configuration

    ü Photovoltaic modules installation and configuration

    ü Photovoltaic module packaging installation and configuration

    ü Lithium iron phosphate battery installation and configuration

    ü AC distribution box installation and configuration

    Part 2: Campus information release system

    ü Outdoor full color screen installation and configuration

    ü receive card installation and configuration

    ü Air conditioners for screen installation and configuration

    ü Steel structure part and outdoor double column installation and configuration

    ü Distribution box installation and configuration

    ü Power supply installation and configuration

    ü Demonstration of live streaming equipment

    Part 3: Smart Classroom

    1)       Smart classroom and control room

    ü Smart classroom equipment installation and configuration

    ü Classroom Control Center equipment installation and configuration

    ü Integrated Normal Classroom Software installation and configuration

    ü Installation and configuration of sound reinforcement system

    ü Camera installation and configuration

    ü Server and network installation and configuration

    ü 42U cabinet installation

    ü Air conditioning installation

    ü Access control system installation and configuration

    ü UPS installation and configuration

    2)       Access control system

    ü Install the access control system for 4 smart classrooms

    3)       Furniture

    ü Table and chair of students

    ü Teacher podium

    4)       Decoration

    ü Ceiling works

    ü Wall cladding and sound attenuation works

    ü Flooring works

    ü Curtain

    ü Recessed type Lighting fixture

    Other general scope of implementation work expected from bidders

    1)       Cabling, routing and managing

    ü Installing UTP and Fiber optic cables, and conduit/ trunk routing.

    ü Installing all power cables. 

    ü Supply and installation of power cable with pipe to each device. It should have circuit breaker if required.

    ü Crimping cables end to end.

    ü Labelling UTP and Fiber optic cables from both ends.

    2)       Piping

    ü All network cables and power cables must be installed hidden in pipes, and no open wires can be seen on site.

    Important Note:

    ü Implementation of this project is on a turnkey basis. Implementation materials and accessories should be supplied by the Vendor.

    ü All accessories such as wires, cables, converters, PVC, HDMI, etc. that need to be considered during implementation shall be considered in the proposal

    ü Required materials and accessories installations are bidders’ responsibility

    Preliminary testing & commissioning, and technical assistance

    ü Powering on equipment after ensuring correctness of terminations interfaces and power supply and making the smart classroom system, gate access control system and Campus information release system ready for testing and commissioning.

    ü All testing tools and instruments shall be brought by the bidder and can be taken back after the testing.

    ü Configuration of the equipment as per the requirements of Dire Dawa university including Network Segmentation and management software.

    ü Site acceptance tests to establish satisfactory performance of the equipment's as per specs.

    ü Assistance for familiarization and operation of the installed system.

    Note: Each of the equipment’s and tools should be of good quality and good standard (The University will never compromise quality, if any of the equipment is below the standard and poor quality the University will reject automatically).

    Important Note:

    ü It is mandatory to conduct the sites survey in order to get comprehensive understanding and come up with complete competitive solution

    ü It is important to consider these requirements as minimum and generic. Bidders are expected to come with their complete competitive solutions

    ü As the project is on turnkey basis, partial offer will be automatically rejected

    Expected deliverable

    1)       High Level design document for all systems

    2)       manuals

    3)       Proposed training and professional certifications should be provided.

    4)       Supply, installation, configuration and commissioning of equipment and material required for the project are bidders’ responsibility.

    Human capacity development and knowledge transfer

    ü The supplier should propose detail local training outline on the training proposal. Technical and administrator training for the entire product to be supplied with Professional Certifications for 10 professional staffs.

    ü During the training the bidder should provide necessary facilities for trainee.

    ü Both practical and theoretical Campus Gate Access Control System, Information release system and Smart classroom installation, configuration training should be considered by bidders.

    Statement of RequirementDescription

    Part 1: Campus gate access control management

    Access control system shall be integrated with the existing campus card system of the campus, create campus vehicle management, personnel access management, access control management, and authentication, and establish a campus personnel information database.

    ü Entry and exit vehicle control system: Outside vehicles entering the campus need to be controlled

    ü Sidewalk gate system: All personnel entering and exiting the campus must pass through the gate

    ü Visitor authentication system: Non-campus personnel need to register when entering the campus

    Currently, the campus has three gates, which serve as the main entrances and exits for staffs, students and vehicles. Our plan is that there must be automated control equipment and systems for the entry and exit of people and vehicles at the main gate of the campus. By using biometric information to identify people entering and leaving the campus (campus card, face, fingerprint, password, etc.), the system will identify different people based on their identities. Perform pre-authorization, the device passes authorization authentication, and access is allowed or prohibited.

    The passage of all persons and vehicles will be monitored and recorded for management to view

    For temporary visitors and unauthorized personnel, they must obtain permission to enter the campus through the visitor authentication system at the main gate of the campus, and have their backpacks and bodies checked to ensure that no prohibited items or dangerous items are brought into the campus.

    Part 2: Campus information release system

    As an important part of campus information construction, the campus information release system can greatly facilitate the dissemination of campus information. The purpose of building this system

    First, to more effectively inform students, teachers, and communities about the campus’s new system, emergencies, holiday information, freshman admission guide, etc., as well as other dynamic information updates;

    The second is to promote school information to visitors, tourists, and parents to enhance the campus image;

    The third is for campus safety, because every year during the graduation ceremony, many family members will participate in the campus celebration activities. These members are not members of the school. Entering the campus will bring security risks, so we need to have a live streaming system to allow them to attend the campus celebrations even if they do not enter the campus.

    So we plan establish an outdoor large-display on the campus main gate; Display campus announcement information, streaming campus graduation celebrations, and play promotional videos that the university hopes to streaming.

    Part 3: Smart Classroom

    Smart classroom is a place used by schools to record teachers’ live teaching process, real-time interactive teaching between classroom teachers and students, remote teaching and teaching research. The normalized cloud classroom has powerful interactive functions, allowing students to learn online without being restricted by time and space, creating conditions for students' personalized learning. Combining social environment teaching can effectively improve students' cognitive abilities.

    Mainly used in:

    ü Complete the recording of high-quality courses and establish a course library for outstanding/key teachers in the school;

    ü Teaching management personnel conduct teaching evaluation and comparison, and network management and monitoring are more convenient, accurate and objective;

    ü Build a network platform for mutual observation and learning, achieve sharing and balance of teaching resources, and increase the number of resources available on the school network information platform;

    ü Establish an online learning platform to enable students to learn independently and fully enjoy the best active learning environment with high-quality resources.

    Other applicable fields:

    ü Provide original materials for online courseware production and quality course construction;

    ü Online distance education and training;

    ü Real-time live streaming and recording of reports and meetings;

    ü Multiple teaching discussions;

    ü Construction of teaching achievements of excellent teachers;

    ü Teaching management and evaluation;

    ü Online autonomous learning management;

    ü Construction and sharing of high-quality dynamic educational resources;

    The university plans to build 4 smart classrooms and has selected suitable locations to install these 4 smart classrooms. The bidder should meet the parameter requirements of all smart classroom equipment and provide the supply, installation, implementation, classroom decoration and other work of all equipment, to ensure the delivery quality of smart classrooms.

    Note: The bidder must provide complete smart classroom design and furniture selection pictures in the technical proposal for the university to evaluate.

    Design Principles

    The bidder shall also identify the customization / work around that would be required for successful implementation and operation of the project. The bidder shall submit the detailed Technical Architecture, which should take into consideration the following guiding principles:

    Scalability - Important technical components of the architecture must support scalability to provide continuous growth to meet the growing demand. The system should also support vertical and horizontal scalability so that depending on changing requirements from time to time, the system may be scaled upwards. There must not be any system imposed restrictions on the upward scalability in a number of sites, Software equipment.

    Availability - The architecture components should be redundant and ensure that is no single point of failure in the key solution components. Considering the high sensitivity of the system, the design should be in such a way as to be resilient to technology sabotage. To take care of remote failure, the systems need to be configured to mask and recover with the minimum outage. The Contractor shall make the provision for high availability for all the services of the system. Filed components of the project should be weather resistance such as withstand lightning, wind, rain, dust, and temperature changes, etc.

    Security - The data is connected through a network and send and receive data to the system, therefore the security of the entire system becomes paramount:

    ü Infrastructure security- including policies for identity and information security policies

    ü Network security- including policies and practices adopted to prevent and monitor unauthorized access, misuse, modification, or denial of a computer network and network-accessible resources, etc.

    ü Identity and Access Management – including user authentication, authorization

    ü End device security, including the physical security of all end devices

    Manageability - Ease of configuration, ongoing health monitoring, and failure detection are vital to the goals of scalability, availability, and security and must be able to match the growth of the environment. The network should be auto/manual configurable for various future requirements for the ease of maintenance / debugging.

    Convergence – Dire Dawa university has already initiated many IT projects. Under the IT infrastructure program, Dire Dawa university has envisaged creating infrastructure and services for the university society, hence it is imperative that all infrastructure created under the project shall be leveraged for maximum utilization. Hence, the bidder is required to ensure that such infrastructure will allow for accommodation of equipment is being procured under other IT projects. The procedure for utilization of the infrastructure will be mutually agreed upon between the university and successful bidder.

    Solution Architecture

    Part 1: Campus gate access control management

    1)       Entry and exit vehicle

    The vehicle control system is mainly distributed in the three gates of the campus. The purpose is to identify the vehicles on campus and off-campus, reduce the cost of labor control, and form records for all the vehicles in and out, and the activity track of the vehicles in the campus can be tracked through software

    2)       Sidewalk gate

    The gate is to control people in and out of the campus and ensure the safety of the campus. We need to classify visitors to distinguish the personnel on campus or off the campus, realize their identity verification through face, fingerprint, campus card (campus card system) and RF technology, and quickly release for authorized personnel

    3)       Visitor authentication

    The visitor authentication system is mainly installed in the main gate, which is prepared for those personnel and vehicles who cannot be identified. After they are automatically rejected by the access control system, they need to register visitors, obtain authorization, and pass security checks before they can enter the campus

    Visitor Terminal:For the identified non-campus personnel, they need to register through the visitor system to obtain temporary authorization or refuse to enter the campus

    Baggage security checker:People need to check their backpacks and belongings when entering

    Security gate:Check whether there are any prohibited items in the person's body or clothes when entering

    4)       Management system and network

    The management software can be integrated with the existing card system, including camera management system, personnel passage management system, vehicle access management system and visitor authentication management system.

    The network requires bidders to clarify their requirements during on-site inspection and must be integrated into the IT equipment already built on the campus to the greatest extent possible.

    5)       Solar Power system

    Construct one sets of 5.0KW solar energy systems at the campus gate to ensure 24/7 operation of the access control system. The bidder should provide all auxiliary materials and accessories for the power supply of the access control system.

    Part 2: Campus information release system

    1)       Display system

    The Display system consists of outdoor full color screen, receive card, control System, air conditioners, power supply, steel structure part and outdoor double column, and distribution box. It takes into account the power supply, network, operating temperature, installation height and method of the display system.

    2)       Live streaming system

    The live streaming system is a set of mobile packaged equipment, including a portable collection and editing all-in-one machine, director's external console, online live streaming system, wireless high-definition pan-tilt integrated camera, professional camera tripod, wireless microphone, and customized trolley case

    Part 3: Smart Classroom

    ü The integrated cloud classroom host collects front-end camera images and records teachers and students’ classroom sounds in real time to form video files. Combined with classroom multimedia equipment and tracking and guidance systems, recording supports simultaneous recording in movie mode and resource mode. Video courseware in movie mode can be used directly for evaluation. Courses, on-demand, etc., resource mode courseware provides complete materials for later secondary video editing.

    ü The main equipment of the interactive classroom includes an integrated cloud classroom host, teacher camera (teacher tracking), student camera (student panoramic view), image tracking system, omnidirectional microphone, speakers, high-definition image collection system, multimedia teaching equipment, etc.

    ü The image tracking system uses face recognition and disparity analysis technology. Teachers can automatically track and shoot multiple scenes (teacher close-ups, student close-ups, student panoramic views, blackboard writing) without wearing any equipment, realizing fully automatic teaching interaction between teachers and students. Record.

    ü For sound collection, two omnidirectional microphones were placed in the classroom to pick up the voices of teachers and students. Teachers and students can complete sound collection without bringing equipment.

    ü The output of the sound played by audio and video materials during interaction and teaching is completed through the two speakers on the left and right in front of the classroom.

    ü The integrated cloud classroom host can be installed on the wall to make the classroom beautiful and tidy.

     

     

     

     

     

     

     

     

     

     

               Detail Specifications

    PART 1: Campus gate access control management

    I.     Entry and exit vehicle control system

    No.

    Product name

    Minimum technical parameters

    1

    Vehicle barrier, right/Left

    Basic   

    Arm Type       Straight arm

    Arm Length   Straight arm:4 m (13.12 ft)

    Arm Model    4 meters

    Opening/Closing Time           Straight arm: 4 m (13.12 ft): 2 s;

    Motor Type    AC variable

    Spring 4 m (13.12 ft): 1 × 6.3 mm blue spring

    Status Output 2 channels. Outputs signals when the arm is in the open or closed position.

    Function         

    Anti-drop       Yes. Loop, IR, and radar anti-smashing.

    Auto Opening in Power Failure         Yes

    Auto Lifting against Obstruction       Yes

    Anti-collision Supports colliding with objects up to 4 m high.

    Count Mode   Yes

    Limit Description       90° (not adjustable)

    Remote Control         Supports remote control at a maximum distance of 50 m (164 ft) when there is no interference.

    Power Output 12 V, 1 A

    General          

    Power Supply 220 VAC ± 10%, 110 VAC ± 10%

    Power Consumption  <200 W

    Spring Lifespan         5 million cycles

    Motor Lifespan          5 million cycles

    Operating Temperature          –40 °C to +70 °C (–40 °F to +158 °F)

    Operating Humidity   10%–90% (RH), non-condensing

    Protection       IP55

    2

    Anti-smash radar

    Emission Frequency  77 GHz–81 GHz

    Emission Power         ≤ 10 mW

    Beam Width   Vertical: ± 10°, horizontal: ± 36°

    Response Time           50 ms

    Detection Region       0.3 m–6 m (0.98 ft–19.69 ft) (adjustable)

    Anti-smashing Region           0 m–2 m (0 ft–6.56 ft) (adjustable)

    Function         

    Detection Target        Human, vehicle

    Online Commissioning          Yes, through serial port or mobile app (with Wi-Fi connection)

    Update Yes, through serial port or mobile app (with Wi-Fi connection)

    RS-485           1

    I/O      2 (1 for update input, 1 for relay output)

    General          

    Operating voltage      9 V–12 V DC

    Operating Current      < 0.25 A

    Power Consumption  < 3 W

    Operating Temperature          –40 °C to +85 °C (–40 °F to +185 °F)

    Protection Grade        IP66

    3

    Entrance and exit cameras

    Focal Length  2.7 mm–12 mm

    Field of View H: 92° (W)—46.1° (T); V: 49° (W)—26.0° (T); D: 109° (W)—52.8° (T)

    Focus Control Auto, area focus, manual

    Lens Type      Motorized Vari-focal

    Max. Aperture 1.4

    Illuminator Number   4

    Illuminator On/Off Control   Auto, manual

    Illumination Distance: ANPR: 10 m (32.81 ft); Video monitoring: 30 m (98.43 ft)

    Smart Illumination     According to the brightness of the environment, the camera automatically adjusts the intensity of its light to reveal the details of moving targets. Devices with warm light can automatically adjust the light intensity according to the time.

    Video Resolution       Main stream: 4M (2688 × 1520)/1080p (1920 × 1080)/720p (1280 × 720)

    Sub stream: 720p (1280 × 720)/960H (960 × 576, 960 × 480)/D1 (704 × 576, 704 × 480)/CIF (352 × 288, 352 × 240)

    Video Compression    H.264H; H.264B; H.264M by default; H.265; MJPEG; H.264M

    Image Tampering Prevention Yes. Watermarks can be added to videos and images. The watermark can also be verified.

    Storage           Bult-in TF card port. Supports Kingston 16 G, 32 G, 128 G, 256 G; Dahua card 16 G, 32 G, 128 G, 256 G; SanDisk 16 G, 32 G, 128 G, 256 G

    Restricted List/Trusted List   Allowlist: 110,000 Blocklist: 110,000

    IVS    Intrusion detection, loitering detection, up to 4 areas can be set.

    Basic Event    Alarms for events of defocus, no storage card, storage card no space, storage card error, network disconnection, IP conflict, and illegal access.

    Sound and Light Alarm         Yes, blue & red indicator, and supports streamlining custom audio.

    Alarm Linkage           Upload to FTP/Memory card, notify monitoring center, send e-mail, trigger alert output, snapshot and active deterrence

    Capture Distance       3 m–8 m (9.84 ft–26.25 ft)

    Detected Width         3 m–4 m (9.84 ft–13.12 ft)

    Network Protocol       HTTP; Https; 802.1x; TCP; ARP; RTSP; RTP; UDP; RTCP; SMTP; FTP; DHCP; DNS; IPv4/v6; NTP; SFTP; DDNS; SNMP; PPPoE

    Management Software          DSS Pro; DSS Express; Cybercity; Smart PSS

    Security          Username and password; MAC address; HTTPS; IEEE 802.1x; network access control

    Chrome 52 and earlier versions

    Image Setting Brightness; contrast; saturation; gamma; sharpness; gain; white balance

    Day/Night      IR filter, support three modes: color/B/W/auto

    WDR  140 dB

    White Balance Auto; Regional Custom; Manual; Outdoor; Natural; Street Lamp

    OSD Overlay Supports overlay of time; address (position of channel), lane (number/direction), plate (number and color), vehicle (speed, color, type)

    Built-in MIC  Yes; Pick-up distance: 3 m (9.84 ft), Sampling Rate: 48 k.

    Built-in Speaker         Yes; Power: 2 W

    Network Port RJ-45 (10/100/1000 self-adaptive Ethernet Port)

    Alarm Output 2, relay output (2A 30 VDC/0.5A 125 VAC), which can connect to devices such as barriers

    Reset Button  Yes

    Wiegand         1 channel, SHA-1 26 bit

    Maximum Number of Passed Vehicles         10000

    AI Recognition          Recognizes vehicle types, vehicle signs, vehicle color, vehicle plate, plate, vehicle without plate.

    Video Metadata         Displays the intelligent frame, plate and vehicle paths.

    Vehicle Color Recognizes 12 colors: Grey, black, white, silver, blue, green, purple, red, orange, pink, brown, and yellow.

    Vehicle Type Recognition     Recognizes 10 vehicle types: Large Bus, Heavy Truck, Medium Truck, Sedan, Van, Light Truck, Medium Bus, SUV, MPV, Pickup

    Capture Rate  In the recommended installation and lighting condition, the vehicle capture rate ≥ 99%

    Communication Band 433 MHz; 868 MHz

    Remote Control Distance      15 m (49.21 ft) (In an open, undisturbed environment)

    Power Supply 12 VDC, 2 A and POE:802.3at, Type 2, Class 4, (44V to 57V), 0.455A to 0.351A, max.20W

    Operating Temperature          –30 °C to +65 °C (–22 °F to +149 °F)

    Operating Humidity   10%–90% (non-condensing)

    Certifications CE-EMC; CE-LVD; CE-RED; FCC

    4

    LED display

    Monitor          LED (displays in red, green and yellow)

    Display Content         Displays license plate information, time, charge information, remaining parking space, custom information, etc.

    Pixels Configuration: 1R1PG

    Resolution:     4,096 dots (64 × 64); 4 lines; pixel pitch: 4.75 mm (0.19")

    Service Life: 100,000 hours

    Screen Brightness: 1,500 cd/m

    Number of LED:        3

    Screen Bad Pixel Detection:  Yes

    Audio: Yes

    RS-485: 1

    Audio Input: 1 channel

    Power Supply: 100 V–240 V AC

    Power Consumption: < 40 W

    Operating Temperature:         –30 °C to +70 °C (–22 °F to +158 °F)

    Operating Humidity   10%–90% (non-condensing)

    IP Rating        IP54

    5

    Pole, 4 meters

    Straight arm with a length of 4 meters.

    Designed with aluminum alloy and a surface that was made rustproof with electrostatic spray.

    Designed with an elastic anti-smashing bar and an LED light bar at the bottom of the arm.

    6

    1.2m pole

    Pole Installation LED display

    1. Dimension:1230*260*255mm

    7

    Camera stand

    1.Material: SECC & SUS304

    2.Dimension (W x H x D) :130.4mmx170mmx45mm (5.13”x6.69”x1.77”)

    3.Mast Diameter: ɸ80~150mm(ɸ3.15”~5.91”)

    4. Operating Temperature: -40℃~+60℃ (-40℉~+140℉)

    5. Humidity: 0~90% RH

    6. Load Bearing: 10kg(22.05lb)

     

     

     

     

     

     

    II.  Sidewalk gate system

    No.

    Product name

    Minimum technical parameters

    1

    Speed Gate Left/Middle/Right

    Dimensions    1500 mm × 200 mm × 980 mm (59.06" × 7.87" × 38.58") (L × W × H)

    Surface Texture          Ink brushed

    Casing SUS304

    Barrier Acrylic or stainless steel

    Motor DC brushless servo motor

    IR Detector    12 pairs

    Anti-collision Yes

    Anti-pinck      Yes

    Memory Mode           Yes

    Anti-tailing     Yes

    Sound & Light Alarm Yes

    People Counting        Yes

    Alarm Yes

    Second Unlock           Yes

    Performance    

    Lock/Unlock Speed   0.5–1.6 s (adjustable)

    Pass Duration 2–60 s (adjustable)

    Lock Delay Duration 0–60 s (adjustable)

    MCBF ≥5 million times

    Passing Frequency     20–60 people/minute

    Passage Width Standard: 600 mm Max: 1100 mm

    Packaging       Wooden box

    Operating Temperature          –25°C to 70°C (–13°F to 158°F)

    Operating Humidity   5%–90% (non-condensing)

    2

    Face/Fingerprint/Card Terminal for the speed gate above

    Network Protocol       UDP; TCP; IPv4; RTSP; SIP; P2P; RTP

    SDK and API Yes

    Display Screen           7" LCD

    Screen Type   Capacitive Touchscreen

    Screen Resolution      600 (H) × 1024 (V)

    Camera           2-MP dual-lens CMOS camera

    Light Compensation  Auto IR

    Voice Prompt Yes

    Verification Method  Card; remote; password; face; combination unlock

    Card Type      IC card

    Period List     128 periods

    Remote Verification  Yes

    Restricted List/Trusted List   Yes

    Wi-Fi  Yes

    Advertisement Playing           Support graphic advertisement play

    Peripheral Card Reader         Supports 1 × RS-485 card reader

    Multi-user Authentication     Yes

    Real-time Monitoring Yes

    Multi-factor Authentication   Yes

    Card Reading Distance          0 cm–3 cm (0"–1.18")

    Face Recognition Height Range        0.9 m–2.4 m (2.95 ft–7.87 ft)

    Face Recognition Distance    0.3 m–2.0 m (0.98 ft–6.56 ft)

    Face Recognition Accuracy   0.999

    Face Recognition Time          0.2 s

    User (Card) Type       General users, patrol users, blocklist users, VIP users, guest users, custom user 1, custom user 2, and other users

    User Capacity 50000

    Face Image Capacity 50000

    Card Capacity 100000

    Password Capacity     50000

    Record Capacity        300000

    USB   1 × USB 2.0 port

    Network Port 1 × RJ-45 10/100 Mbps Ethernet port

    Alarm Linkage           Yes

    Exit Button    1

    Door Status Detection 1

    Lock Control  1

    Anti-pass Back           Yes

    Tamper Alarm Yes

    Duress Alarm Yes

    Door Sensor Timeout Yes

    Intrusion         Yes

    Illegal Card Exceeding Threshold     Yes

    Power Adapter           Included

    Power Supply 12 VDC, 2 A

    Operating Temperature          –20 °C to +55 °C (–4 °F to +131 °F)

    Operating Humidity   0%–90% (RH), non-condensing

    3

    Bracket

    Adopts aluminum alloy material

     

    III.            Visitor authentication system

    No.

    Product name

    Minimum technical parameters

    1

    Visitor Terminal

    Receipt printer Thermal dot matrix printing, printing speed up to 120mm/s, paper width 58mm, paper roll diameter 50mm

    Code scanning performance  Scanning Angle: 54°, identifiable print contrast: minimum 35% reflection difference, decoding ability: all standard 1D bar codes, QR codes

    camera 2 million CMOS wide dynamic camera

    Operating system       Android 7.1

    Bar code reader          Light source: LED visible red light and auxiliary white light, reading distance: 5-15cm, scanning speed: 100 times /s, scanning type: image type

    Power source  Standard configuration

    Hard disk       EMMC 16G

    Document scanner     Support a variety of document scanning system scanning components: camera, maximum format 127mm×76.2mm optical resolution 2560dpi×1920dpi Scanning speed < 1s

    Operating temperature           - 10 ℃ ~ + 55 ℃

    Working humidity     < 80% (no condensation)

    USB interface Four USB2.0 ports

    Main processor           High performance embedded processor

    Power supply mode   AC 198~242V 0.23A

    Housing material        ABS

    Screen type    Front screen: capacitive screen, rear screen: non-touch screen

    Display screen Front screen: 13.3 "touch screen, rear screen: 10.1" TFT screen

    Network protocol       TCP

    appearance     Visitor aircraft

    Screen resolution       Front screen: 1920x1080, rear screen: 1024x600

    Keyboard type Full touch keyboard

    Information storage   Local save of the result

    Information upload    The comparison results are uploaded through the network

    Voice prompt support

    Wi-Fi  support

    2

    Baggage security checker

    CPU   Intel dual-core processor

    RAM  8 G

    Operating System      Embedded Linux OS

    User Interface Local GUI (full functions); Web interface

    Tunnel size     620 mm × 420 mm

    X-ray Tube Anode Voltage   160 KV

    X-ray Tube Cooling   Sealed oil bath with forced air

    Wire Resolution         Typical: 40AWG, Standard: 38AWG *

    Penetration(steel)       Typical: 41mm; Standard: 34 mm *

    Leakage Dose-rate     ≤ 0.9 μSv/h (μGy/h)

    Noise Level    ≤ 65 dB

    Conveyor Speed        Default: 0.2 m/s; 0.3 m/s and 0.4 m/s adjustable

    Conveyor Hight         660 mm to 720 mm adjustable

    Maximum Belt Load 170 kg (374.78lb) **

    Power Saving mode   Support

    Current Leakage        ≤ 0.25 mA

    Film Safety    ISO 1600 (33 DIN)

    Preview          Real-time display of X-ray package image and camera image; real-time item intelligent analysis

    Item Recognition       Recognizes items and displays AI overlay; the AI overlay box moves with packages

    Recognition Types     Recognizes 22 types of objects: Guns, fireworks, spray cans, knives, axes, scissors, lighter fluid, nail polish, bottled liquids, glass bottles, thermos bottles, plastic bottles, handcuffs, nightsticks, brass knuckles, lighters, tools, electronic products, mobile phones, powerbanks, laptops and umbrellas

    Danger Levels High risk, warning, and safe (supports custom configuration according to types of objects)

    Event Linkage I/O alarm, voice prompt, platform alarm and screen notification can be triggered according to danger levels

    Image Storage Stores as much as 1 million images with information on their danger levels and the types of objects detected. Original and analyzed images can both be viewed

    Baggage Search         Search, play back, and export baggage images and linked videos according to time, objects type and more

    Report Search Generate and export reports according to time and object types

    Backup           USB/Network

    Self-inspection           Automatically detects system failures and prompts error codes

    Image Processing       Enhancement functions include color/black and white, local enhancement, super enhancement, edge enhancement, image scanning, organic stripping, metal stripping , mixture stripping, inverse, high-energy enhancement, low-energy enhancement, light, dark, density threat alert Z7/Z8/Z9, high density alert, AI overlay, vertical flip, pseudo color and more

    Image playback          Supports playback of 30 images

    Image Zooming          Zoom in X-ray images up to 64x. Drag the focus position using a mouse or direction- keys

    Device Diagnosis       Supports diagnosis of key components such as the detector, motor, IR sensor and special keyboard

    Detection Configuration        Key function configuration; image display configuration (vertical flip and max zoom times), scan mode configuration (double direction, forward scan, reverse scan, compulsory scan and power saving mode, baggage counter configuration and personpackage linkage configuration

    Graphics Output        2-channel DVI outputs; resolution: Up to 1920 (H) × 1080 (V) @60 Hz

    Monitor          1 × 21.5" monitor

    Video Input (Network)          12-channel input (max 4K); 8-channel IPC + 4 PoE (2 PoE by default); supports H.265, H.264, PCM and MPEG4

    Recording Mode        Offers manual recording and recording plan. Recording plan features continuous recording, alarm event linked recording and no recording

    Built-in Disks Supports up to 4 × 10 T SATA disks and configures 1 × 4T disk by default

    Storage Management Single; RAID 0/1/5 (Enterprise-level disks are recommended); global hot standby

    Ethernet Ports 1 RJ-45 10M/100M/1000M self-adaptive Ethernet ports; 4 RJ-45 PoE 10M/100M Ethernet ports

    Internet Protocols       HTTP, HTTPS, TCP/IP, UDP, RTSP, IPv4, NTP, DHCP, DNS, IP Filter, IP Search (Support Dahua IP camera, DVR and more)

    Interoperability          ONVIF, SDK and more

    rs 232 Port     1-channel RS 232 port for controlling the operating keyboard

    Power port     1-channel port for monitor power supply

    USB Port        2-channel USB3.0, 2-channel USB2.0

    Display Port   2-channel DVI outputs

    Emergency Stop Button        3 (2 buttons on the machine body and 1 button on the operating keyboard)

    Power Button 1 (on the operating keyboard)

    Key Switch    1 (on the operating keyboard)

    Indicator light On the machine:

            Power indicator: Turns solid green when the machine is working and flashes during updates and when an error occurs

            X-ray indicators: Turn solid red when X-ray is triggered and turns off when X-ray is turned off

            On the operating keyboard:

            Key switch indicator: Turns solid green when the switch is turned on and turns off when the switch is turned off

            Power button indicator: Turns solid green when the power button on the operating keyboard is pressed on. Light turns off when the machine is powered off

            Press button indicators: Flashes green when one button is pressed on

    Power Supply AC 220 V–240 V, 50/60 Hz; AC 100 V–130 V, 50/60 Hz (optional)

    Intelligent Temperature Control        Detects the temperature of main board and HDD and automatically adjusts fan speed to make it work stably and quietly

    Operating Temperature          0 °C to +45 °C (32 °F to +113 °F)

    Operating Humidity   0%–95%

    3

    Security gate

    Detection Sensitivity  NILECJ-STD-0601.00 Level 5

    Precise Positioning     18 overlapping detection zones, bilateral transmission and receipt of detection signals; 2-panel indicator lights

    Zone Indication         6, 12, or 18 independent zones selectable, and multiple metal items can be located simultaneously

    IR Sensor       Infrared sensor can reduce false alarms; automatic alarm statistics and pass/return statistics

    Adjustable Sensitivity 255 adjustable sensitivity levels in each detection zone (sensitivity increases by levels)

    Remote Control         Comes with a infrared remote controller with the maximum remote control range of 2 m (6.56 ft)

    Leakage Current        < 0.5 mA, complying with safety requirements for electronic devices

    Operating Voltage     12 VDC, power adapter (included): 100 V–240 VAC, 50/60 Hz

    Operating Temperature          –20 °C to +65 °C (–4 °F to +149 °F)

    Operating Humidity   0–95% (RH), non-condensing

    Storage Temperature/Humidity         –20 °C to +65 °C (–4 °F to +149 °F)/0–95% (RH), non-condensing

    Power Button Power switch on both door panels, and metal detection power switch on the front panel

    Indicator Light           One green indicator

    Human Shape Display           18 detection zones

    Environmental Noise Monitors and displays real-time signal strength of environmental interferences

    Alarm In/Out 1-channel input, and 1-channel output

    Network Port 1 RJ-45, 100 Mbps

    Power Output 12 VDC

    4

    Security inspection machine monitor table

    The table top can be flipped over, and the key can be used to lock the fixed in the closed state

    5

    Security machine entrance table

    Removable safety roller

    Stainless steel roller

    Supports cascade connection between extension conveyors

    High-strength frame, maximum load is 170kg.

    Supports installation at the entrance or exit of the security screening machine

    Ⅳ. Solar Power system

    No.

    Product name

    Minimum technical parameters

    1

    Solar System-5.0KW

    Maximum output power 5.0 kw, output AC 220Vac, including mains charging and mains bypass, DC input 48Vdc, maximum photovoltaic input 3KW, MPPT voltage range 70-256V

    2

    Lithium iron phosphate battery

    10KWh-48V200Ah (including battery to inverter connection cable, wall-mounted)

    3

    Photovoltaic modules

    Monocrystalline 550W photovoltaic module

    4

    Photovoltaic module packaging

    Photovoltaic module packaging

    5

    Photovoltaic bracket

    Use with supporting photovoltaic modules

    6

    Photovoltaic cable

    PV-4mm² cable

    7

    MC4 connector

    Use with supporting photovoltaic modules

    8

    AC distribution box

    18U

    9

    RVV3*2.5

    RVV3*2.5

    10

    Accessories

    Other equipment accessories not mentioned but that bidders should consider

     

    V. Network and Management

    No.

    Product name

    Minimum technical parameters

    1

    28-Port Managed Gigabit Switch with 24-Port

    Product type Gigabit Ethernet switch, network managed switch, smart switch

    Application level 2nd level

    Transmission rate 10/100/1000Mbps

    Exchange method store-and-forward

    Backplane bandwidth 336Gbps/3.36Tbps

    Packet forwarding rate 96Mpps/126Mpps

    Port description: 24 10/100/1000Base-T adaptive Ethernet ports; 4 Gigabit SFP ports/4 Gigabit SFP+ ports/4 Gigabit SFP ports (2combo ports)

    Control port 1 Console port

    Transmission mode full-duplex/half-duplex adaptive

    Features

    VLAN supports port-based VLAN, MAC-based VLAN, protocol-based VLAN, QinQ, flexible QinQ, VLAN Mapping, Voice VLAN, and GVRP

    QOS supports 802.1p/DSCP priority marking

    Multicast management supports IGMP Snooping

    Support MLD Snooping

    Support multicast VLAN

    Support RMON (Remote Monitoring) alarms, events, and history records

    2

    UTP Cable

    (UTP) Full Copper CAT6 UTP cable 305M Per Roll

    3

    Server

    1* Standard panel

    1* Xeon E-2334 3.4GHz, 8M cache, 4C/8T, Turbo (65W), 3200 MT/s

    1*8GB UDIMM, 3200MT/s, ECC

    1 x 2TB hard disk SATA 6Gbps 7.2K 512n 3.5-inch cable

    1* single wired power supply, 450W

    1* motherboard with Broadcom 5720 dual-port 1Gb motherboard with integrated LOM

    1*iDRAC9, Basic 15G

    1* static guide rail

    1* Power cord - C13

    4

    Management software

    Including access control management, parking management, video surveillance management, visitor authentication management, one-card management, intrusion alarm, line crossing alarm, VMS, ETC

    5

    Single Mode Fiber Optic Cable (indoor/Outdoor)           

     

    24 core, 9/125 µm, outdoor (armored) Fiber Optic cable

    Multiple 900um tight buffered fibers (stranded around the central strength member)

    Fire Retardant.

    Internal and External Use.

    Water Resistant.

    Rodent Resistant.

    Color coded fibers for easy identifications.

    6

    48 x 10/100/1000Base-T (PoE+) ports, 4 x 10GE SFP+ ports

    48 x 10/100/1000Base-T (PoE+) ports, 4 x 10GE SFP+ ports

    1+1 power backup

    PoE+

    Forwarding performance: 125 Mpps

    Switching capacity: 176 Gbps/672 Gbps

    7

    24 x 10/100/1000Base-T (PoE+) ports, 4 x 10GE SFP+ ports

    24 x 10/100/1000Base-T (PoE+) ports, 4 x 10GE SFP+ ports

    1+1 power backup

    PoE+

    Forwarding performance: 96 Mpps

    Switching capacity: 128 Gbps/672 Gbps

    8

    Accessories

    Other equipment accessories not mentioned but that bidders should consider include adapters, network jumpers, RJ45, HDMI cables, fiber optic pigtails, couplers, etc.

    PART 2: Campus information release system

    I. Display system

    No.

    Product name

    Detailed parameters

    1

    10m2 Outdoor full color screen with all accessories

    1. Pixel spacing: ≤2.5mm;

    2. Pixel composition: 1R1G1B;

    3. Pixel density: ≥160000Dots/㎡;

    4. Brightness: 3500-4000cd/㎡

    5.Brightness uniformity: ≥97%;

    6. Refresh rate: ≥3840Hz;

    7. Flatness of the entire screen: ≤1mm;

    8. Color temperature: 9600-12500 adjustable;

    9. Horizontal/vertical viewing angle: ≥140°/130°;

    10. Pixel out-of-control rate: ≤0.00001, 0 at the factory;

    11. Peak power consumption: ≤800W/㎡, average power consumption: ≤300W/㎡;

    12. Gray scale: red, green, blue 13-14bits;

    13. Maintenance method: supports front and rear maintenance;

    2

    Air conditioners,18000btu/hr

    18000btu/hr

    3

    power supply

    LED dedicated power supply

    4

    receive card

    The maximum loading resolution of a single card is 512x384@60Hz: For general-purpose driver ICs, the maximum loading resolution of a single card is 384x384Q60Hz. Supports brightness correction, fast light and dark line adjustment, 3D, RGB independent Gamma adjustment and other functions to improve the screen display effect and user experience. It uses 16 standard HUB7SE interfaces for communication, has high stability, supports up to 32 sets of RGB parallel data, and is suitable for the construction of a variety of on-site environments.

    5

    Control System

    "1. Supports up to 5 input interfaces, including 1 DVI, 1 HDMI1.3, 1 VGA, 1 USB playback, and 1 CVBS.

    2. Support window position, size adjustment and window interception functions.

    3. Support one-click switching of input sources.

    4. Support external independent audio.

    5. Supports input resolution preset and custom adjustment of DVI and HDMI.

    6. Supports three zoom modes: one-click full-screen zoom, point-to-point display, and custom zoom.

    7. Supports quick screen click, and the screen configuration can be completed with simple operations.

    8. Supports 4 network port outputs, with a maximum load of 2.6 million pixels, a maximum width of 3840 pixels, and a maximum height of 1920 pixels.

    9. Supports the creation of 6 user scenarios and saves them as templates, which can be called directly for easy use. "

    6

    Steel structure part and outdoor double column

    Outdoor steel structure, 4.26m*2.5m=10.7㎡ (including 50mm edging on all sides)

    The overall steel frame structure is beautiful, neat, strong and stable.

    Customized according to on-site conditions

    7

    Distribution box

    Standard version power distribution cabinet 15KW

    8

    Accessories

    Other accessories and work not specified but required to be provided by the bidder

    II. Live streaming system

    No.

    Product name

    Detailed parameters

    1

    Portable all-in-one acquisition and editing machine

    Hardware Configuration:

    1. The system adopts embedded architecture design, with built-in ARM processor, no less than 256GSSD, Gigabit Ethernet, and also has 2.4G Hz wifi and 4G full network module.

    2. The system has high-performance encoding and decoding capabilities. Supports multi-protocol video coding and decoding, H.264 multi-stream coding and decoding, supports CBR/VBR code rate control, and supports ADPCM/G.711/G.726 audio hardware coding.

    3. The video supports at least 2 SDI and 2 HDMI input interfaces, supports local video playback, the network stream input is not less than 5 channels of streaming capability, and the resolution can reach 1080p60; it has automatic detection of signal format and automatic elimination Interlacing capability.

    4. The video supports at least 1 SDI and 2 HDMI output interfaces, and supports network streaming (live streaming) function; the output supports up to 1080p60.

    5. The system has a built-in 4x4 MIMO wireless image transmission module (non-WIFI module), which can realize point-to-point wireless video transmission with up to 4 image transmission cameras. The maximum transmission rate of the image transmission module can reach 300Mbps, using 4x4 MIMO, using the 5.8Ghz channel, the transmission distance is 200 meters, and it has the characteristics of anti-interference and stable transmission. Has the ability to control the camera pan/tilt wirelessly. It is necessary to provide supporting materials such as color pages and product screenshots as the basis for scoring.

    6. Have at least 2 USB interfaces, which can connect USB keyboard, mouse and storage devices.

    7. The built-in screen size must not be less than 11 inches, and it must be a touch display screen with a resolution of not less than 1920x1080.

    8. Have at least 2 channels of balanced audio input and output, support TRS/XLR interface input; have 1 channel of 3.5mm headphone monitoring output.

    9. The bottom of the equipment needs to have a built-in support frame that can be rotated more than 90 degrees for support.

    Software configuration:

    1. In order to realize the ability of fast live streaming, the system needs to support one-click live streaming function. The system needs to have built-in multiple live streaming platforms (witness, business live streaming, macro, Weibo, Facebook, Youku, YouTube etc.) live streaming; any one-click live streaming can be realized the ability to push to multiple live streaming platforms.

    2. In order to produce rich live streaming programs, the system needs to be equipped with a built-in material library and provide a wealth of online resources such as picture materials for users to download and update online. At the same time, it is necessary to support external supply of picture materials.

    3 For the production of sports competition programs, the system needs to provide a large number of simple and easy-to-use tools, such as providing a scoreboard template resource library for users to download and update online; for example, it has the function of customizing team names and team logos; it has three levels of score addition. subtraction function, and the score gear can be customized; it has game scores and game points, and supports positive and countdown game time counting.

    4. In order to meet a variety of live streaming needs, the system needs to have multi-channel mixing capabilities. The system has SDI/HDMI embedded audio, XLR input audio, network streaming audio, and DDR video embedded audio mixing. Each input supports gain adjustment. And mixing switch, the output after mixing supports gain adjustment. Each input and output VU size is visually monitored.

    5. In order to produce rich live streaming programs, the system needs to have picture-in-picture capabilities, with a variety of two-picture, four-picture and other picture-in-picture templates, and support custom settings.

    6. For the convenience of users, the system needs to have a built-in virtual keyboard, support touch input, and support English and Chinese double-pin input methods.

    7. It has the function of quick connection of front-end equipment. The front-end equipment can quickly connect to the streamlining equipment by scanning the QR code or entering the six-digit code (without entering the complex RTMP address).

    8. Support channel customization function. The input channel can freely choose physical input, network input and other video loading methods according to the actual situation on site.

    9. It has the function of inputting and sending on the same screen. Scan the QR code with your mobile phone to quickly synchronize the text input on the mobile phone to the input method input box of the streaminger, realizing rapid input of information.

    10. In order to facilitate the later editing of the program, the system has the ability to record PGM signals and full-channel video. The video recording format and bit rate are adjustable.

    2

    Director external console

    Support 12 channels of PGM/PVW buttons;

    Supports output volume adjustment, with audio faders, and stereo LED lights dynamically display the output volume UV in real time;

    Supports T-bar, AUTO, and CUT switching operations, and the automatic switching time is adjustable;

    Support local material playback control;

    Support recording and streaming control buttons;

    Supports pressing buttons to select CG pages, and pressing buttons to control publishing/unpublishing CGs;

    Support subtitles and clock control buttons;

    Support 4 corner mark control button operations

    Supports switching between stunt button selection and knob selection;

    Supports USB power supply, no external power supply required;

    Support USB communication;

    Support 8-way TALLY;

    The buttons are all dual-color lights with a blue background.

    3

    Webcast system

    P2P live streaming system functions:

    1) Supports Flash player + background P2P accelerator, compatible with all mainstream browsers (IE/Google/Firefox/360/Sogou/QQ, etc.); it will automatically switch to direct connection mode if there is no P2P accelerator installed;

    2) Multi-terminal support, supporting simultaneous viewing on PC, Android phone/PAD, iOS phone/PAD, and set-top box;

    3) Support P2P, the load of a single server can reach more than 3,000 people, and the bandwidth saving rate reaches more than 80%;

    4) Supports ultra-large-scale deployment, system deployment is highly scalable, supports P2P+CDN structure, and supports intelligent load balancing; adding and reducing servers does not require adjustments to other platforms (such as CMS);

    5) Supports RTMP/MMS/UDP TS push streaming and RTMP/MMS/HTTP TS pull streaming; RTMP/MMS streaming supports user password verification;

    6) Support RTMP/HTTP/P2P/HLS playback;

    7) The image playback speed is fast, and the image can be played out within 1 second at the fastest;

    8) Support virtual file live streaming, provide multiple streaming modes such as scheduled streaming, back-up streaming, sequential streaming, carousel streaming, etc., support live streaming push priority function, and support stream recording function;

    9) Supports time-shifted replay; the number of days of replay retention is adjustable; supports obtaining the replay program form from a third-party platform;

    10) Use private protocol transmission to ensure the security of content streamlining, support anti-leeching and anti-download functions; support IP and domain name rule filtering; support password, user + password, domain name verification and other access control strategies;

    11) Supports a variety of advertising types, including buffering, pausing, stopping, text on the video, text on the player, overlay on the video, web page pop-up window, lower right corner pop-up window, etc.; advertising content supports text, pictures, Flash, web pages; Support advertising alliance; ads can be clicked;

    12) Support superimposing corner mark on video and transparent channel;

    13) The live streaming delay is adjustable, and the minimum delay can be up to 1 second;

    14) Using UDP transmission, the gateway penetration capability is strong and can penetrate more than 90% of gateways. It supports UPNP; if UDP fails to work, the network will automatically switch to TCP;

    15) Provide copies of computer software copyright certificate and software registration certificate with official seal.

    4

    Wireless HD PTZ integrated camera

    1. Adopts a 1/2.8-inch 2.07 million pixel high-quality image sensor with a maximum resolution of 1920×1080 and an output frame rate of up to 60 frames/second.

    2. It has a variety of optical zoom lens options such as 5x, 10x, 12x, 20x, and 30x. The lens has a distortion-free wide viewing angle of more than 80°.

    3. Using 4×4 MIMO and transmitter beamforming technology, the maximum transmission rate can reach 300Mbps, with strong penetration, transmission distance of 300 meters, and can be cascaded.

    4. Supports various control methods such as network VISCA, Onvif, SDK, etc., and can remotely control the camera without connecting additional control lines.

    5. Use high-precision stepper motors and precision motor drive controllers to ensure the gimbal operates smoothly at low speeds and without noise.

    6. Supports low-power sleep/wake-up, with power consumption less than 400mW during sleep.

    7. Supports up to 255 preset positions.

    8. Apply 2D and 3D noise reduction algorithms to significantly reduce image noise, and the image signal-to-noise ratio is as high as 55dB or more.

    9. Comes with a camera battery and battery buckle plate to power the camera. A full charge supports the camera to work for 6 hours.

    5

    Professional camera tripod

    Material: aluminum alloy

    Colour: Black

    Applicable models: SLR cameras, mirrorless cameras, DV cameras

    Number of leg sections: 4 sections

    Maximum pipe diameter: 30mm

    Minimum pipe diameter: 20mm

    Folded height: 60cm

    Minimum working height: 55cm

    Maximum working height: 159cm

    Leg lock type: Toggle type

    PTZ type: hydraulic PTZ

    Screw size: 1/4

    Load bearing: 5kg

    Weight: 2.13kg"

    6

    wireless microphone

    Dual channel wireless receiver

    • Consists of a transmitter and a receiver

    • UHF transmission with 48 UHF channels

    • Suitable for ENG/EFP, DSLR video

    • streaming quality sound

    • Operating range up to 100 meters

    • Adjustable MONO and stereo modes

    • Transmitter and receiver each powered by 2 AA batteries"

    7

    Custom trolley case

    Customized integrated aviation trolley case, which can store the main unit/camera/supporting power supply/microphone.

    RT 3: Smart classroom

    No

    Product name

    Detailed parameters

    1.Smart classroom

    1

    86" Interactive Board

    I. Product specs:

    1.The front of the whole machine is displayed as a flat blackboard made of three spliced pieces. It has a non-push-pull structure and adopts integrated design and seamless splicing technology. It has good integrity and integrity. The writing blackboards on both sides are made of special writing glass. The entire front of the blackboard can be written with ordinary chalk, liquid pen, or dustless chalk.

    2.Overall machine size: length ≥ 4000mm, height ≥ 1200mm, thickness ≤ 100mm. The display screen in the middle area adopts 86-inch industrial grade A-standard LCD panel, image resolution 3840*2160, display ratio 16:9, brightness: no less than 500cd/m², viewing angle no less than 178 degrees, response speed ≤8ms.

    3.It adopts capacitive touch, supports 20-point touch and HID driver-free technology. It can realize the writing and operating functions of multiple people at the same time without installing a driver. The surface is made of glass with a thickness of no less than 4mm, and the full bonding technology reduces polarization and scattering between the display panel and the glass. The screen display is clear and transparent, and the viewing angle is wide.

    4.The smart e-blackboard module is made of aluminum-magnesium alloy material with good thermal conductivity.

    5.The chip processor is A311D2, CPU is 4 Cortex-A73@2.2GHz and 4 Cortex-A53@2.0GHz. GPU is Arm Mali-G52 MP8 (8EE), 4G RAM, 32G ROM.

    6.Under any signal, the machine supports gesture switch to turn on/off the LCD panel.

    7.In order to facilitate the operation of the teacher, the whole machine must have front physical buttons, no less than 8. The functions should include at least power, homepage, lock screen, screen recording, touch lock, volume increase and decrease, settings. To simplify operations, the above functions are directly accessible with one button instead of multiple button combinations.

    8.Front ports include USB3.0≥3, HDMI IN≥1, touch Type-B≥1 Type-C≥1, type-c is full functions including signal, touch, and USB flash.

    9.Under frame ports includes RS232 network port≥1, touch Type-B≥1, HDMI IN≥1.

    10.Side mount ports include RJ45 IN≥1, HDMI OUT≥1, Audio IN≥1, Audio OUT≥1, USB3.0≥1.

    11.The bottom of the middle screen of the smart e-blackboard supports an integrated aluminum alloy chalk slot design, which can be used to place touch pens and chalk teaching supplies.

    12.Supports front physical buttons and virtual buttons to enable screen recording function. All operations under Windows can be recorded with one click. Supports virtual buttons to realize system restore function. Before restoring, you need to enter the administrator password for confirmation to ensure that unauthorized personnel do not operate it accidentally.

    13.With speakers 2*15W.

    II. System functions:

    1.Support Android 11.

    2.The Android system interface preview window displays the current real-time picture of the corresponding signal source, including OPS, HDMI, Type-C and other channels. Click the signal source name, and the preview window will jump to the corresponding signal source display screen; click the display window, and the signal window will be displayed in full screen. Supports custom settings for the name, order, and display of signal sources to meet the usage needs of different scenarios.

    3.In order to facilitate teaching use, the device can modify and remember the name of the signal source as needed, support automatic identification and switch to the newly connected signal source for display, and return to the previous signal source after disconnecting the signal source.

    4.The Android homepage has commonly used fixed application teaching software. Teachers can support custom sorting and deletion of software in fixed applications according to actual teaching needs. At the same time, the recently opened teaching software applications can be displayed, and the software recently used by teachers can be displayed to facilitate teachers to quickly call it.

    5.The Android system interface supports automatic shutdown by default countdown; click the shutdown button to shut down immediately, and also supports restart or screen rest operations. If you shut down accidentally, just touch the screen to cancel the shutdown.

    6.It supports shortcut function keys on both sides of the screen, and supports the left and right floating ball toolbar functions in any channel. Click the floating ball to pop up a floating box.

    7.The small toolbar at the bottom of the floating frame provides teaching tools (annotations, eye protection, USB disk, move down, self-test, home page, screen recording, one-click restore, process, screenshot, return, etc.), which can be expanded according to actual usage scenarios. Supports custom sorting, addition and deletion of gadgets.

    III.OPS          

    1.OPS adopts a modular computer solution and a pull-out built-in downward design to minimize the impact and accumulation of dust and dust;

    2.It adopts a standard 80-pin OPS-C computer interface without any external connections, making it convenient for teachers to use and maintain.

    3. Processor: no less than Intel 10th generation Core series i5 CPU.

    4. Memory: 8G DDR4 or above.

    5. Hard drive: 256G or above SSD.

    6. With independent non-external expansion video output interface: ≥1 channel HDMI, with independent non-external expansion computer USB interface: ≥3 channels USB.

    7. The PC module supports hot swapping without power interruption for quick maintenance or module replacement.

    8. Support win11 pro English version operating system

    2

    Integrated Cloud Classroom host

    1. Embedded in an integrated architecture, it has functions such as recording, directing, storage, and interaction;

    2. Support IP network camera access capability;

    3. Built-in storage: ≥ 1T mechanical hard drive;

    4. Host appearance parameters:

    - Size ≤406 * 340 * 68 (mm);

    - Weight ≤ 7KG;

    - Working temperature: 0-50℃;

    - Installation method: wall-mounted;

    5. System parameters:

    - Input voltage: AC110-240V/50~60HZ;

    - Power: Maximum 120W;

    - Video interface: ≥ 1 channel VGA, ≥ 1 channel HDMI; ≥ 2 channels IPC input, ≥ 1 channel VGA/HDMI output (same display);

    - Video format: input/output up to 1920*1080 60fps;

    - Encoding: H.264;

    - USB interface: ≥2 USB2.0;

    -Support online upgrade;

    6. Audio parameters:

    - Audio interface: ≥2 capacitor MIC (with 48V phantom power supply) input, ≥2 LINE input, stereo speaker output;

    - MIC sampling rate: 48KHZ;

    - Frequency response: 20HZ-20kHz;

    - Input processing: NR,AEC;

    - Channel noise: <-90dBu;

    - Dynamic range: 99dBU;

    - Output power: Maximum 2 x 25W (4Ω);

    - Input sensitivity: >60db;

    - Input impedance: balanced 20kΩ, unbalanced 10kΩ;

    - Signal-to-noise ratio: >60dB;

    - Distortion: <0.2% (rated power 4Ohm/1kHz condition);

    - Frequency response range: 20 to 20 kHz;

    - Tuning function: Volume, treble and bass are adjustable;

    - Protection functions: overheating, overload, short circuit protection;

    7. Network parameters:

    - Network interface: ≥ 1 RJ45 interface, ≥ 1 WAN port, ≥ 4 LAN ports (with standard POE), support port priority;

    -Transmission speed: 10/100Mbps adaptive;

    -Support POE power supply mode;

    - Lightning protection function: support, 5000KV;

    -Port power supply: maximum 30W;

    8. Expansion interface ≥2 USB2.0, 1 RS-232 serial interface

    3

    Integrated Normal Classroom Software

    1. Support real-time audio and video interactive teaching as the main/attentive classroom with other remote classrooms or end users, and quickly build remote audio and video interaction such as large-scale synchronous classrooms, express delivery classrooms, and joint school online teaching at the city, district (county), and school levels. teaching applications;

    2. Supports local recording, multi-party interaction and live classroom, four teaching scenarios of video conferencing, and is suitable for a variety of teaching application modes, such as synchronous classroom, special delivery classroom, quality classroom recording, online live classroom, third-party interconnection, etc. A teaching application; provides screenshots of this function in the same software interface, and is stamped with the original official seal;

    3. Support the premium course recording function to realize the real-time synchronous collection and recording of no less than 3 scene high-definition videos (teacher panorama, student panorama, and teaching PC);

    4. Supports "movie mode + resource mode" synchronous recording, the recording format is standard MP4 format, the recording resolution can be up to 1080P, the recording code stream can be set; supports full screen, two-split screen, off-screen, multi-split screen and other display recording Effect;

    5. Supports local recording and storage function. The file name of the recorded video is automatically generated based on the date and time, which is convenient for query and retrieval;

    6. Support the lecturer's local recording during teaching interaction. The recorded video can be saved locally and uploaded to the platform at a selected time.

    7. Support online viewing of online live streaming classes. You can watch live classes without logging in. Support viewing the number of live streaming viewing users and viewing live streaming previews.

    8. Supports access to IP network camera system, and the connected network camera can be used as any scene camera;

    9. Supports hard collection of video signals. The teaching PC desktop video signal can be directly collected through the VGA or HDMI interface without delay and tailing. It supports adding interactive settings to set the video source, and supports setting the on/off status of the video source. You can choose camera or HDMI. signal, supporting IPC, rtmp and other media stream access.

    10. Supports the collection of VR panoramic video images (a VR panoramic camera needs to be deployed). Remote users can watch panoramic classroom images through mobile terminals and realize two-way audio and video interaction with the classroom;

    11. It also supports LCD touch screen and remote control to guide "local recording" and "interactive teaching" scenes. It can realize functional demonstrations such as recording, stopping, and split-screen switching, and can intelligently switch to the first display of teachers' teaching, student speeches, remote teacher-student interaction, teaching PCs, booths, blackboard writing, etc. with one click. The switching process is smooth and smooth, without glitches. Flashing phenomenon;

    12. Support online class patrols: By configuring the publishing server on the online class terminal, you can quickly start the live stream to the platform, and platform users can conduct remote centralized class patrols without interfering with the teaching process;

    13. Support teachers to intuitively see the names and online status of students or classes displayed in the list by dragging the list up and down when operating the LCD guide touch unit. The students or classes displayed in the list support page turning, and the maximum number of displays is not limited. At the same time, Connect online classes or students to the classroom for audio and video interaction by controlling the touch-control guidance station;

    14. Support teachers to control the recording and streaming process when operating the LCD guide touch unit, which can start, pause, stop, lock/unlock the teaching PC signal, and lock/unlock any video screen;

    15. Supports full touch screen control. Teachers can independently, proactively and arbitrarily perform recording and streaming control, guide control, split-screen control, interactive control and other operations through the touch screen without the assistance of other personnel during course recording scenes and remote multi-party interactions. When the teacher operates the LCD guide touch unit, he calls the course recording and interactive teaching functions through the interactive recording and streaming system control interface. It is required that the calls be made on the same system interface, rather than through the superimposition of multiple sets of systems; provide buttons for the recording function and Take a screenshot of the interactive teaching function keys on the same screen and stamp it;

    16. In the two-split screen (the video screen is divided into two independent left and right video screens) display mode, the touch screen sliding and dragging operation is supported to exchange the left and right video positions of the two-split screen; provide a two-split screen screenshot and stamp it with the official seal;

    17. In the one-to-two display mode (the video screen is divided into one main screen video and two small video screens), the touch screen sliding and dragging operation is supported to switch any small video screen to the main screen. At the same time, the second small video screen is Positions can also be interchanged between video frames; one-to-two split-screen screenshots are provided and stamped with official seals;

    18. Switch to off-screen (there is a small video screen outside the main video screen, and the two screens are on the same screen);

    19. Support remote control control. A single remote control needs to support functions such as stop/recording, PPT page turning, remote screen switching, local screen switching, split-screen mode switching, etc. to facilitate teacher use. Video evidence is required.

    20. In the main lecture classroom, manual guidance and one-click switching of automatic guidance are supported. In the automatic guidance mode, the student screen, teacher screen, and computer screen can automatically switch to the first screen. In the manual navigation mode, manual sliding is supported to drag the student screen and teacher screen to the homepage in a WYSIWYG manner.

    21. Supports the assistant teaching assistant function. The listening teacher applies for the assistant teaching function. The teaching teacher receives the application terminal status prompt. The teaching teacher conducts a qualification review for the assistant teacher. After passing the review, the listening teacher can display in the local classroom for the main teaching classroom. Switch the screen to assist the lecturer in the classroom to provide the best display screen. It supports more than a hundred people to participate in the interaction at the same time. The presenter can set the display position of the interactive video; it supports manual dragging on the touch screen to control the video display position.

    22. After remote users access the interactive classroom, teachers can check the name and number of connected users through the professional manual console. At the same time, teachers can actively connect remote online users to the interactive classroom for two-way audio and video interaction;

    23. Have the authority to control interactive teaching when teaching a class;

      Supports lecturers to control member microphone permissions. After disabling it, attending members will not be able to turn on their microphones.

      Supports lecturers to control member camera permissions. After disabling it, attending members will not be able to turn on their cameras.

      Support the lecturer to control whether the member screen is visible to members in the room.

      Support members who are attending lectures to raise their hands, and a hand-raising prompt will appear on the screen of the lecturer.

      Support the teaching teacher to "remove users" from members and remove unqualified users from the classroom.

      Supports the lecturer to mute all members with one click. After muting, members other than the lecturer will not be able to speak.

      Support the lecturer to clear the classroom with one click, and all users who clear the classroom will be asked to leave the classroom;

      Supports viewing terminal online status, audio status, and video status.

    24. Supports access as a lecture classroom. Listening users can choose to accept the auxiliary flow of the main lecture classroom, which can ensure smooth interaction when the network condition is not good.

    25. Listening users support the function of applying to speak. After the lecturer receives the information, he authorizes the right to speak, and the user on the listening side can streaming his audio and video to all users to achieve remote interaction.

    26. Support local saving of historical user records. Users who have logged in as local users can be recorded in a list. You can directly select them when you log in next time. No need to enter again, which is convenient for operation.

    27. The system interface comes with a virtual soft keyboard, which allows Chinese and English input and related operation functions without the need for an external USB keyboard.

    28. Support remote management control function: the management system is built into the host, and users can log in to the integrated cloud classroom terminal through a browser in the local area network for daily management and maintenance;

    29. Support setting the interactive server address connected to the integrated cloud classroom terminal;

    30. Supports configuring the video picture quality collected by the integrated cloud classroom terminal, including resolution (HD/UHD), frame rate, device code stream, etc.;

    31. Supports the management and operation of recording files stored in the integrated cloud classroom terminal, including viewing, downloading, deleting and other operations;

    32. Support the configuration of the integrated cloud classroom terminal network connection parameters, serial port number, host name, device port, etc. to facilitate unified management;

    33. Support setting the initial split-screen mode of the integrated cloud classroom terminal, including "full screen, two-split screen, off-picture, multi-split screen" and other split-screen display modes;

    34. Support device restart operation for the integrated cloud classroom terminal;

    35. Supports system upgrade via U disk/web page; supports U disk/hard disk data backup;

    36. Support network module settings, which require enabling or disabling dual IP functions, and support simultaneous access to multiple (≥2) different networks/network segments, such as: cross-network segment access, internal and external network access;

    37. Support disconnection and reconnection function: when conducting remote interactive teaching, the system can reconnect after the network is interrupted and restored, and continue normal remote interactive teaching;

    38. In remote teaching interaction, when the network has a packet loss rate of up to 30%, audio and video interaction between terminals can still be smooth; a copy of the software test report with an official seal is required, and the original will be kept for future reference after winning the bid;

    39. Considering network security, dual-protocol (private protocol and standard SIP protocol) communication must be supported. The standard SIP protocol (can communicate with mainstream manufacturers such as Polycom, Huawei, Cisco, etc.) can achieve interconnection and interoperability with other manufacturers.

    40. Support network detection, test whether the network between the terminal and the server IP communicates normally, and judge the network situation according to the pop-up prompt window.

    41. Support audio detection, input and play audio on the interface, and understand in time. Support touch screen detection, which can detect equipment problems in time and ensure smooth teaching.

    42. Support the lecturer terminal to set any video accessed as the auxiliary stream. The listening terminal is on the same display screen and supports one-click switching to the auxiliary stream for video preview.

    43. Support multiple terminals to join in the interaction, Android terminals, Windows devices, and embedded devices can interact at the same time, and the systems are interconnected.

    4

    Panel hosting omni directional wheat

    1. Sensor type: Φ24 back-pole electret capacitor head

    2. Circuit characteristics: JFET impedance transformation; electronic balance

    3. Directivity: 360-degree omnidirectional pickup, pickup radius up to 8 meters

    4. Frequency response: 50Hz-20kHz

    5. Sensitivity: -44±3dB (0dB=1V/Pa@1kHz)

    6. Rated output impedance: 2.2kΩ

    7. Minimum load impedance: 1kΩ

    8. Signal-to-noise ratio: 75dB(S:(f=1kHz@1Pa) N:(A-Weighted curve))

    9. Maximum sound pressure level: 115dB (f=1kHz, THD<1%)

    10. Power supply/current consumption: VS=1.5V@2.2kΩ

    11. Dynamic range: 104dB (20Hz-20kHz@2.5kΩ)

    12. Maximum output level: 1.6dBV (20Hz-20kHz, THD<1%@2.5kΩ)

    13. Output interface: mini XLR-3 male

    14. Power supply mode: 48V phantom power

    15. Installation method: hanging installation

    5

    Speaker

    1. Low frequency driver: 5" coaxial unit*1;

    2. Frequency response: 80Hz-20KHz (-10dB);

    3. Frequency division mode: internal frequency division;

    4. Recommended high-pass frequency: 80Hz;

    5. Sensitivity: (1 watt/1 meter) 88dB;

    6. Maximum sound pressure level/1 meter (calculated): 98dB;

    7. Coverage (-6dB standard) level: 90°;

    8. Coverage (-6dB standard) vertical: 90°;

    9. Power: ≥35W;

    10. Impedance: 4Ω;

    11. Box material: high-density board box.

    6

    HD front camera

    1. Image sensor: 1/2.8 inches, CMOS, effective pixels: 8.46 million;

    2. Video resolution: 3840x2160, 1920x1080, 1280x720;

    3. Focal length: f=2.8mm;

    4. Digital zoom: 8 time;

    5. Horizontal field of view: 95°;

    6. Auto focus: support;

    7. Minimum illumination: 0.5Lux @ (F1.8, AGC ON);

    8. White balance: automatic, indoor, outdoor, one-touch, manual, specified color temperature;

    9. Video coding standard: H.264/MJPEG;

    10. Audio encoding: AAC;

    11. Network protocols: TCP/IP, HTTP, RTSP, RTMP, ONVIF, DHCP;

    12. Network interface: 1 RJ45: 10/100/1000M adaptive Ethernet port, supports PoE;

    13. Dual stream: supported;

    14. Video interface: 3G-SDI supports POC;

    15. Audio interface: 1 Line In, 3-core Phoenix port;

    16. Control interface: 1 channel RS485;

    17. Protocol: VISCA/Pelco-D/Pelco-P protocol;

    18. Working temperature: -10°C ~ 40°C;

    7

    HD rear camera

    1. Image sensor: 1/2.8 inches, CMOS, effective pixels: 8.46 million;

    2. Video resolution: 3840x2160, 1920x1080, 1280x720;

    3. Focal length: f=7.2mm;

    4. Digital zoom: 8 times;

    5. Horizontal field of view: 42°;

    6. Auto focus: support;

    7. Minimum illumination: 0.5Lux @ (F1.8, AGC ON);

    8. White balance: automatic, indoor, outdoor, one-touch, manual, specified color temperature;

    9. Video coding standard: H.264/MJPEG;

    10. Audio encoding: AAC;

    11. Network protocols: TCP/IP, HTTP, RTSP, RTMP, ONVIF, DHCP;

    12. Network interface: 1 RJ45: 10/100/1000M adaptive Ethernet port, supports PoE;

    13. Dual stream: supported;

    14. Video interface: 3G-SDI supports POC;

    15. Audio interface: 1 Line In, 3-core Phoenix port;

    16. Control interface: 1 channel RS485;

    17. Protocol: VISCA/Pelco-D/Pelco-P protocol;

    18. Power supply: DC 12V / PoE (802.3af);

    19. Power consumption: ≤6W;

    20. Working temperature: -10°C ~ 40°C;

    21. Built-in leading image recognition and tracking algorithm, it can intelligently analyze teachers’ behavior during teaching and automatically control the camera for tracking and shooting;

    8

    Outdoor 8MP Smart Face Recognition and ANPR Camera

    8-MP 1/1.8" CMOS image sensor, low luminance, and high-definition image.

    Outputs max. 8MP (3840 × 2160) @50/60 fps.

    Built-in IR LED, and the max. illumination distance is 60 m.

    ROI, flexible coding, applicable to various bandwidth and storage environments.

    Two intelligent functions can be enabled at the same time, such as face recognition+ people counting, face detection+ people counting and PPE Detection+ IVS.

    With deep learning algorithm, it supports face recognition, face detection, IVS, people counting, video metadata, PPE Detection, parking space management and ANPR, etc.

    Mosaics can be automatically placed over the face or body of a person to protect their privacy.

    Alarm: 3 in, 2 out; audio: 1 in, 1 out; RS-485; BNC; supports max. 1 TB Micro SD card.

    12 VDC/24 VAC/PoE power supply, 12 VDC power output, max. current

    165 mA and peak current is 700 mA, easy for installation.

    IP67 and IK10 protection.

    EPTZ

    Note: accessories and mounting pole will be bidders responsibility.

    9

    Wireless microphone

    1. Carrier frequency range: UHF band 500 MHz - 860MHz;

    2. Available frequency bandwidth: 60MHZ (740-770MHZ) 30MHZ (770-800MHZ) 30MHZ two groups;

    3. Number of channels: ≥1200 frequency points optional, (600 per channel);

    4. Oscillation mode: PLL phase-locked frequency synthesis;

    5. Frequency stability: ±0.005%, PLL phase locked loop frequency control;

    6. Modulation mode: FM frequency modulation;

    7. Rated/peak frequency deviation: ±15kHz/±48kHz;

    8. Signal-to-noise ratio S/N: >105dB (A);

    9. Distortion T.H.D.: <0.5% @ 1KHz;

    10. Dynamic range: >105dB Receiving sensitivity: -103dBm;

    11. Audio output level: XLR (BALANCE) 0dBV;

    12. Effective distance: sight distance ≥ 50 meters (without interference);

    2. Receiver

    1. Receiver mode: secondary frequency conversion superheterodyne;

    2. IF frequency: first IF: 110MHz, second IF: 10.7MHz;

    3. Wireless interface: TNC seat;

    4. Sensitivity: S/N>65dB when the offset is equal to 25KHz and the input is 6dBμV;

    5. Adjacent channel suppression: ≥65dB;

    6. Image suppression: >75dB;

    7. Audio output: Reference value: ±25 kHz deviation, 1 kHz tone;

    8.XLR interface (connected to 100kΩ load): 0dBV;

    9.1/4-inch connector (connected to 100kΩ load): +2dBV;

    10. Output impedance: XLR interface 100Ω 1/4-inch interface: 220Ω;

    11. Current: less than 350mA;

    3. Transmitter

    1. Carrier frequency band: UHF 500~860MHz;

    2. Oscillation mode: PLL synthesized;

    3. Carrier power: 10 mW;

    4. Harmonic radiation: <-63dBm;

    5. Maximum deviation: ±45KHz;

    6. Sound head: moving coil type, cardioid directivity;

    Current consumption: <110 mA.

    10

    Rack 42U

    ·        Cabinet size with wheels installed (width x depth x height): 600 x 800 x 1160 mm. Wheel height: 70 mm.

    ·        The 19 "front / rear rack racks are adjustable in depth, as they are mounted on rails that allow their movement. Rack profiles thickness, 2mm.

    ·        Useful background of 687 mm (from front frame to the back cover of the cabinet). Distance between front and rear frame 575 mm (user configurable).

    ·        Compatible with ANSI / EIA RS-310-D, IEC60297-2, DIN41494 (PART1) and DIN41494 (PART7) standards.

    ·        Compatible 19 ”International Standards, ETSI.

    ·        Cabinet made of SPCC steel 1.2mm thick, painted in black (RAL 9004).

    ·        It is supplied disassembled in flat-pack, for convenience of transport.

    ·        Maximum static load supported: 1,200 Kg.

    ·        The front and rear doors are perforated sheet metal for better interior ventilation. With security key.

    ·        Top / bottom cover with cable glands.

    ·        The top cover is adapted for the installation of 4 120mm side fans (fans not included).

    ·        Possibility of installing upper ventilation cover (reference # WO2x).

    ·        Removable side covers They have drilling for the installation of lock with key. The lock is not included.

    ·        The cabinet is supplied with wheels to facilitate its mobility. 4 leveling feet are supplied to configure the cabinet in a fixed position and height adjustable.

    ·        Includes hardware package for fixing accessories rack 19 "(20 units).

    11

    Smart Director

    1. Monitor size: 15.6 inches

    2. Display ratio: 16:9

    3. Backlight type: LED

    4. Point spacing: 0.252×0.252 mm

    5. Display area: horizontal 344mm, vertical 194mm

    6. Best resolution: 1920 × 1080@ 60 Hz

    7. Response time: 5ms

    8. Color: 16.7 million

    9. Brightness: 500 cd/m2

    10. Contrast ratio (standard value): 1000:1

    11. Viewing angle: R/L 130(Typ.), U/D 100(Typ.)

    12. Touch screen type: Capacitive touch screen

    13. Cover glass: 2.4mm

    14. Touch screen transmittance: 85±5%

    15. Surface hardness: ≥6H

    16. Number of touch points: 10

    17. Touch response time: ≤10 ms

    18. Touch method: Finger / capacitive pen

    19. Single touch life: ≥50 million times

    20. Touch linearity: <2%

    21. Single point operating system: Windows XP, Linux

    22. multi-point operating system: Windows7/8/10, Android

    23. Video input format: RGB analog signal / digital signal

    24. Input interface: VGA+HDMI, DC socket, USB2.0

    25. OSD control panel: switch, menu, up, auto, down

    26. Power input: DC 12V±5%

    27. Normal power: ≤15w

    28. Working temperature: 0℃-50℃; Storage temperature: -20℃-60℃

    29. Working humidity: 20%-70%; Storage humidity: 10%-90%

    30. Operating altitude: <3000 meters

    31. Product certification: CE, FCC, RoHS, CCC

    12

    Air conditioners

    Standing cabinet type

    Power supply:380-415/3/50

    Cooling:

    Capacity:48000 BTU/h

    Power input:4620W

    Rated Cument:9.55A

    indoor noise level (H/Me/Lo):51/47/41dB

    Outdoor Noise level:60dB

    Refrigerant type: R410A

    Working temperature: cooling mode 18 degrees Celsius/48 degrees Celsius

    Control mode: Wired/Wireless

    13

    Rack Mountable UPS 3KVA with at least 2hours battery run time

    capacity (VA/Watts):3000vA / 3000W

    phase: single phase with ground with

    INPUT:

    Nominal voltage:200/208/220/230/240va

    operating frequency range:40~70Hz

    power Factor:0.99

    OUTPUT:

    output voltage:200/208/220/230/240vac

    power Factor:1.0

    voltage Regulation:47~53Hz or 57~63Hz

    Efficiency:

    AC Mode:92%

    Battery Mode:90%

    BATTERY:

    Backup time:2 hour

    Typical recharging time (standard mode): hours recover to 90% capacity

    overheat Line mode: switch to bypass; Backup mode: shutdown UPs immediately

    Battery low Alarm and switch off

    STANDARDS

    safety lEC/EN62040-1,lEC/EN60950-1

    EMC lEC/EN62040-2,lEC61000-4-2,lEC61000-4-3,lEC61000-4-4,lEC61000-4-5,lEC61000-4-6,lEC61000-4-8

    14

    Power distributor

    Enclosure and Electrical panel board for distribution with bus bar for ATS

    Inputs

    63A three phase MCB circuit breaker (QTY=1)

    Outgoing:

    32A single phase MCB circuit breaker (QTY=6)

    16A single phase MCB circuit breaker (QTY=10)

    15

    Fire Extinguisher (3kg)

    Fire Extinguisher (3kg)

    2.Classroom Control Center

    1

    E-learning Platform

    1. The platform adopts B/S architecture and supports direct access through a browser;

    2. The platform supports load balancing deployment mode to ensure that basic services such as service access, response, application calling, and performance balancing reach optimal status, thereby ensuring that services always run smoothly without service unavailability, access delays, and network access blocking. , or even unexpected situations such as downtime occur;

    3. The platform supports application modules to access centralized management functions, and can online debug and manage all currently accessed transcoding services, publishing services, MCU interactive services and other modules;

    4. The platform supports docking of interactive recording and streaming, popular interactive recording and streaming terminals, and network set-top boxes to realize interactive teaching functions between interactive recording and stream streaming, popular interactive recording and streaming terminals and network set-top boxes, which requires live video streams and interactive information streams during the teaching process. The interconnection and interworking functions with the traditional Internet can be realized through the operator's private network;

    5. The platform supports automatic upgrade services for front-end intelligent and normal hosts. After the terminal is connected to the platform, it can automatically compare software versions and perform automatic upgrades;

    6. Support the provision of multi-party remote interactive teaching, video transcoding and live streaming distribution services;

    7. Support the establishment and management of interactive classrooms, and manage the permissions of users in interactive classrooms;

    8. Supports mixed access of professional hardware terminals, PC terminals, mobile terminals and other devices. Each terminal device can have high-quality audio and video two-way interaction in different network environments such as private network, Internet, mobile network, etc.;

    9. Support the creation and management of open courses. Open courses can be watched through browsers and mobile APPs. During the live streaming, text comments can be made;

    10. Support users to choose different definitions/code streams (ultra-definition, high-definition, standard definition, smooth) to watch live video streams when watching live streamings;

    11. Supports centralized deployment and can accommodate capacity support within 50 points;

    12. Supports multi-terminal concurrency, and a single server supports simultaneous access to no less than 200 terminals for two-way audio and video interaction; a copy of the software test report with an official seal is required, and the original copy will be kept for future reference after winning the bid;

    1. School-level portal

    1. Special Delivery Classroom: Displays today’s special delivery class list, as well as recorded resources of past special delivery classes, which can be viewed online. After obtaining authorization, classroom lecturers and interactive classroom users log in to the classroom through teaching terminal equipment, mobile apps, etc. to listen to classes.

    2. Open courses: display the school’s live open courses; support display of basic course information of open courses, including course name, school, start time, etc.; support display of live streaming preview list;

    3. Online classroom: supports the display of school-level resources and special resources. It also supports multi-dimensional retrieval and other functions, and supports the preview of documents and picture resources such as word, ppt, excel and the playback of video resources.

    4. Famous Teacher Classroom: The display module of the school’s teacher resource space: supports teachers to upload and maintain resources, and administrators to review resources.

    5. Data Cockpit: Supports school-level interactive classroom teaching statistics, teaching and research statistics, equipment usage information, large-screen display and other functions.

    6. Personal space: The display module of teachers’ personal resource space supports the uploading and management of resources in common multimedia formats.

    7. My attention: The display module of personal attention space supports teachers to pay attention to the classroom space of famous teachers. The spaces that have been followed are displayed in my attention list.

    8. My Collection: The display module of personal collection resources supports teachers to collect resources from various resource modules. The collected resources are displayed in the My Collection list.

    2. Basic school applications

    1. Basic information configuration: School administrators can add, delete, modify, and check teacher and student data. It also supports configuring data management for other common scenarios, including settings for courses, score import, score ranges, rankings, etc.

    2. Teaching information import and management: Teachers can manage the school’s courses, examination categories and results. Score management includes score import, score editing and deletion management, score batching, score analysis, etc., and detailed analysis of class test scores, including score details, rankings, teaching situation analysis and evaluation, etc. You can also set up frequently used contacts to facilitate sending text messages and messages to improve work efficiency.

    3. Special delivery class schedule management: supports the import or addition of special delivery class course plans, such as the main lecturer, course topic, class time, class location and attendance related information, and enables the creation of open classes, synchronous classes and special delivery classes, and the selection and setting of interactive classrooms, Lecture and lecture authorization and other management functions.

    4. School-level timetable: Supports display of school timetables, and supports viewing timetables in different time dimensions (daily, weekly).

    5. Interactive classroom management: Interactive classroom management is the core support for carrying out synchronous classes, online classes, online teaching and research and other services. Interactive classroom management realizes functions such as classroom creation, editing, and user authorization. Supports access to interactive recording and streaming classroom cameras to realize remote centralized class patrol monitoring applications.

    6. Appointment management: It supports making appointments for the school’s recording and streaming classrooms at any time to carry out activities in various teaching and research scenarios, and can also manage reserved records.

    7. Resource management: Supports the management of school-level subject resources. The resources support defined fields such as users, schools, classes, subjects, and resource directories according to unified standards. It supports functions such as auditing and label management, and supports word, ppt, excel, etc. File type management and upload.

    8. Theme resource management: Supports custom resource albums and creates themes based on different albums and themes. Supports the management and upload of multiple file types such as word, ppt, excel, etc.

    9. Resource Recycle Bin: Administrators at all levels can restore and manage deleted resources through the Resource Recycle Bin.

    10. In-school live streaming: Supports the creation of virtual online live streamings in the school LAN environment, which can be used to hold on-campus online classes, remote parent-teacher meetings and other educational and teaching applications; supports the control of users watching specific live streamings, real-time monitoring of live streamings, and the adoption of corresponding processing measures, including Management of system user accounts and passwords, management of on-campus live streaming equipment and control of whether users need to log in.

    11. Evaluation management: Schools can flexibly set evaluation items, evaluation cycles, initial scores for each item, and evaluation rules according to actual needs. Teachers on duty can quickly and easily record the evaluation scores of each class through the mobile APP.

    12. Leave management: Students can initiate leave requests on the system. The class teacher can review and approve the leave application submitted by the student, and can choose to accept the leave or reject the application, and support filling in the reasons for rejecting the leave. Both the head teacher and the classroom teacher can view all leave records of the students in the class they are responsible for.

    13. Attendance management: The school can flexibly set and modify attendance rules suitable for the school according to the school system, season, weather, holidays, etc. Supports flexible setting of attendance days and attendance time periods. Teachers can check the attendance status of the class in real time on each terminal, including the number of late arrivals, number of leave requests, number of absences in the class, as well as the detailed attendance time and attendance status of each student. Students can check their attendance status on each terminal on the system, including whether they arrive and leave school on time and whether they have asked for leave.

    14. Announcements: Administrators, head teachers and teachers can publish announcements and assignments on the platform, and parents can receive and view them on their mobile phones. Teachers can choose notification and assignment recipients. Class teachers and classroom teachers can view notifications and assignment release history, and notifications support viewing the list of unread recipients.

    15. Score management: Administrators can set exam categories, midterm exams, final exams, monthly exams, etc. Head teachers and classroom teachers can use templates to import class student scores in batches or manually select subjects and edit and enter them online one by one. After the class teacher and class teacher upload the results to the system, they can optionally push information to the parents' mobile phones, including the selected subject, total score, overall class ranking, single subject class ranking and other data.

    16. Administrative timetable management: Class teachers and teachers can manage the class timetable, view and edit existing class timetables, create new class timetables, and import class timetables in batches using templates. After the class schedule is uploaded, parents and students can view the student class schedule on their mobile phones.

    17. Student comprehensive quality evaluation: The system has built-in five comprehensive quality evaluation dimensions: moral, intellectual, physical, aesthetic, and labor. Teachers can record student performance from multiple angles. The evaluation content complies with the general student evaluation standards, reflects the comprehensive development of moral, intellectual, physical, artistic, and professional characteristics of ordinary students as well as the development of personality and specialties. It objectively records the outstanding performance of students in their growth process and provides important reference for students' graduation and further studies.

    18. Class circle: Establish a class communication and interaction module for each class. The main functions include class members and class training, class announcements, class dynamics, class photo albums, class articles, etc.

    - Class members and class motto: The class teacher, teachers and students together constitute the class members of this class. You can view the list of class members in the class circle. The class teacher can add and edit class training as a display of class cultural characteristics of the class.

    - Class announcement notification: The class teacher can publish public announcements in the class circle, or send individual notifications to members of the class. The notification supports pictures, text and attachments. Published notifications can be viewed as read. Students can view announcements and notices issued by the class teacher on multiple terminals.

    - Class dynamics: Class members can achieve real-time interaction in multiple scenarios by publishing class dynamics in the form of pictures and texts, such as problem analysis, homework assignments, outstanding achievement display, life insights sharing, learning experience, etc.

    - Class photo album: The class teacher can quickly create and edit photo albums. The default photo album is visible to all members in the class circle, enabling convenient cloud management of class photos in multiple scenes, such as student award presentations, excellent homework presentations, class activity silhouettes, etc. Students can multi-terminal downloads are saved locally.

    - Class articles: The class teacher can publish long promotional pictures and texts about the class situation, and the published articles will be automatically shared to the teacher's class updates.

    2

    2U Server

    2u 4210 (2.2GHz/10 cores/13.75MB/85W)

    32GB 2Rx4 DDR4-3200 memory

    4*4TB 6G SATA 7.2K 3.5in EV 512e HDD universal hard drive

    4-port GE electrical interface network card

    2 x 550W AC power supplies

    WinsVR2019 Standard Edition Server System

    3

    Interactive teaching cloud classroom host

    1. It adopts wall-mounted installation and supports live streaming, directing, recording, storage, interaction and other functions;

    2. Video parameters:

    - Video input interface: 1 VGA and 1 HDMI.

    - Supports 2-channel network camera access at the same time.

    - Video output interface: 1 HDMI and 1 VGA (supports simultaneous display or different display);

    - Video format: input/output up to 1080P/60fps

    3. Audio parameters:

    - 2 line inputs, using Phoenix terminals.

    - 1-way wireless microphone access, using Phoenix terminal.

    - 2 audio outputs, using Phoenix terminals.

    - Audio features: AEC, ANC, automatic lip sync.

    4. Encoding protocol: H.264, AAC, RTMP, RTSP, G.722, supports SIP multimedia communication (optional);

    5.Network parameters:

    - 5 network interfaces, 4 of which support standard POE power supply.

    -Transmission speed: 10/100Mbps adaptive.

    - Lightning protection function: support, 5000KV.

    -Port power supply: maximum 30W.

    - Protocol standards: IEEE 802.3, 802.3U, 802.3x, 802.3af;

    6. System parameters:

    - Built-in storage: standard 1T mechanical hard drive (expandable);

    - Expansion interface: 2-way USB2.0

    - Input voltage: AC110-240V/50~60HZ;

    4

    Wireless microphone

    1. Carrier frequency range: UHF band 500 MHz - 860MHz.

    2. Available frequency bandwidth: 60MHZ (740-770MHZ) 30MHZ (770-800MHZ) 30MHZ two groups.

    3. Number of channels: ≥1200 frequency points optional, (600 per channel);

    4. Oscillation mode: PLL phase-locked frequency synthesis.

    5. Frequency stability: ±0.005%, PLL phase locked loop frequency control.

    6. Modulation mode: FM frequency modulation.

    7. Rated/peak frequency deviation: ±15kHz/±48kHz.

    8. Signal-to-noise ratio S/N: >105dB (A);

    9. Distortion T.H.D.: <0.5% @ 1KHz.

    10. Dynamic range: >105dB Receiving sensitivity: -103dBm.

    11. Audio output level: XLR (BALANCE) 0dBV.

    12. Effective distance: sight distance ≥ 50 meters (without interference);

    2. Receiver

    1. Receiver mode: secondary frequency conversion superheterodyne.

    2. IF frequency: first IF: 110MHz, second IF: 10.7MHz.

    3. Wireless interface: TNC seat.

    4. Sensitivity: S/N>65dB when the offset is equal to 25KHz and the input is 6dBμV.

    5. Adjacent channel suppression : ≥65dB;

    6. Image suppression : >75dB;

    7. Audio output: Reference value: ±25 kHz deviation, 1 kHz tone.

    8.XLR interface (connected to 100kΩ load): 0dBV.

    9.1/4-inch connector (connected to 100kΩ load): +2dBV.

    10. Output impedance: XLR interface 100Ω 1/4-inch interface: 220Ω.

    11. Current: less than 350mA.

    3. Transmitter

    1. Carrier frequency band: UHF 500~860MHz.

    2. Oscillation mode: PLL synthesized.

    3. Carrier power: 10 mW;

    4. Harmonic radiation: <-63dBm

    5. Maximum deviation: ±45KHz

    6. Sound head: moving coil type, cardioid directivity

    Current consumption: <110 mA.

    5

    Active Speaker

    1. Input impedance: 4Ω;

    2. Frequency response range: 20Hz-20KHz

    3. Rated power: 25W+25W

    4. Tweeter: 1.5 inches

    5. Bass unit : 5 inches;

    6. Input port : AUX

    7. Separation: ≥45dB (THD+N=1%)

    8. Signal-to-noise ratio: ≥85dB

    9. Distortion: ≤1%

    6

    HD PTZ camera

    1. Sensor: 1/2.8 inches, CMOS, effective pixels: 2.07 million

    2. Scanning mode: line by line

    3. Lens : 20x, f4.42mm ~ 88.5mm, F1.8 ~ F2.8;

    4. Minimum illumination : 0.5Lux @ (F1.8, AGC ON);

    5. Shutter: 1/30s ~ 1/10000s

    6. Signal-to-noise ratio: ≥55dB

    7. Field of view: horizontal 60.7°~ 3.36°, vertical 34.1°~ 1.89°

    8. Rotation range: horizontal ±170°, vertical -30° ~ +90°;

    9. Rotation speed range: horizontal 1.7°~ 100°/s, vertical 1.7°~ 69.9°/s;

    10. Horizontal and vertical flip: supported

    11. Video output interface: 1 channel HDMI, 1 channel 3G-SDI, resolution up to 1080P/60fps

    12. Network interface: 1 channel, RJ45: 10M / 100M adaptive Ethernet port.

    13. Video coding standard: H.264/MJEPG

    14. Network output resolution: supports up to 1080P/30fps

    15. Communication interface: 1 RS232 In, 1 RS232 Out, 1 RS485

    16. Input voltage: DC 12V;

    7

    Smart Director

    1. Monitor size: 15.6 inches

    2. Display ratio: 16:9

    3. Backlight type: LED

    4. Point spacing: 0.252×0.252 mm

    5. Display area: horizontal 344mm, vertical 194mm

    6. Best resolution: 1920 × 1080@ 60 Hz

    7. Response time: 5ms

    8. Color: 16.7 million

    9. Brightness: 500 cd/m2

    10. Contrast ratio (standard value): 1000:1

    11. Viewing angle: R/L 130(Typ.), U/D 100(Typ.)

    12. Touch screen type: Capacitive touch screen

    13. Cover glass: 2.4mm

    14. Touch screen transmittance: 85±5%

    15. Surface hardness: ≥6H

    16. Number of touch points: 10

    17. Touch response time: ≤10 ms

    18. Touch method: Finger / capacitive pen

    19. Single touch life: ≥50 million times

    20. Touch linearity: <2%

    21. Single point operating system: Windows XP, Linux

    22. multi-point operating system: Windows7/8/10, Android

    23. Video input format: RGB analog signal / digital signal

    24. Input interface: VGA+HDMI, DC socket, USB2.0

    25. OSD control panel: switch, menu, up, auto, down

    26. Power input: DC 12V±5%

    27. Normal power: ≤15w

    28. Working temperature: 0℃-50℃; Storage temperature: -20℃-60℃

    29. Working humidity: 20%-70%; Storage humidity: 10%-90%

    30. Operating altitude: <3000 meters

    31. Product certification: CE, FCC, RoHS, CCC

    8

    36000 btu Air conditioners

    Standing cabinet type

    Power supply:220/1/50

    Cooling:

    Capacity:36000 BTU/h

    Power input:3810W

    indoor noise level (H/Me/Lo):51/47/41dB

    Outdoor Noise level:60dB

    Refrigerant type: R410A

    Working temperature: cooling mode 18℃/48 ℃

    Control mode: Wired/Wireless

    9

    Rack Mountable UPS 3KVA with at least 2hours battery run time

    Capacity (VA/Watts):3000vA / 3000W

    phase: single phase with ground with

    INPUT:

    Nominal voltage:200/208/220/230/240va

    operating frequency range:40~70Hz

    power Factor:0.99

    OUTPUT:

    output voltage:200/208/220/230/240vac

    power Factor:1.0

    voltage Regulation:47~53Hz or 57~63Hz

    Efficiency:

    AC Mode:92%

    Battery Mode:90%

    BATTERY:

    Backup time:2 hour

    Typical recharging time (standard mode): hours recover to 90% capacity

    overheat Line mode: switch to bypass; Backup mode: shutdown UPs immediately

    Battery low Alarm and switch off

    STANDARDS

    safety lEC/EN62040-1, lEC /EN60950-1

    EMC lEC/EN62040-2, lEC61000-4-2, lEC61000-4-3, lEC61000-4-4, lEC61000-4-5, lEC61000-4-6, lEC61000-4-8

    10

    Power distributor

    Enclosure and Electrical panel board for distribution with bus bar for ATS

    Inputs

    63A three phase MCB circuit breaker (QTY=1)

    Outgoing:

    32A single phase MCB circuit breaker (QTY=6)

    16A single phase MCB circuit breaker (QTY=10)

    11

    UPS 6KVA with at least 2hours battery run time

    1. Rated capacity (KVA): 6KVA rack type

    2. Rated input voltage (Vac): 220 / 230 / 240

    3. Input voltage range (Vac): 110~286

    4. Input frequency range (Hz): 40~70

    5. Input power factor: 0.99

    6. Output voltage (Vac): 220/230/240 (±1%)

    7. Output frequency (Hz): AC mode: 50/60 (±4); Battery mode: 50/60 (±0.1%)

    8. Current peak ratio: 3:1

    9. Output voltage harmonics (THD): <2% (100% linear load)

    10. Overall efficiency: 94%

    11. Overload capacity: ≤125%, 10min; ≤150%, 1min; >150%, immediately switch to bypass

    12. Power factor: 0.9

    13. Alarm function: multiple alarm functions such as overload, AC abnormality, UPS failure, battery undervoltage, etc.

    12

    Fire Extinguisher (3kg)

    Fire Extinguisher (3kg)

    13

    Server aggregation switch Ports:

    24 10/100/1000BASE-T Ethernet ports, 4 10G SFP+

    Switching capacity: 448 Gbit/s

    Forwarding Performance 240 Mpps

    14

    42U server cabinet

    1. The 42U server cabinet adopts an assembled structure. The front and rear doors are flat single-opening mesh doors, with ventilation reaching 80% (width 600mm*depth 1000mm*height 2000mm).

    2. High-quality cold-rolled steel plate, square hole bar 2.0mm, mounting beam: 1.5mm, other 1.2mm, maximum static load: 1000KG, can run up and down and left and right;

    3. The maximum opening angle of the front and rear doors is >180 degrees.

    4. The two side panels are removable, leaving upper, lower, front and rear wiring channels;

    5. The fan unit is installed from the top, making it easy to disassemble and maintain during use;

    6. The cabinet has reserved ground mounting holes, lifting holes and grounding posts;

    7. Surface degreasing, pickling, phosphating, pure water cleaning, electrostatic spraying treatment, in line with European ROHS environmental standards;

    8. Equipped with 1 6-position PUD, 40 sets of screws, 3 partitions, 1 bottom plate, 4 wheels, 4 brackets, 1 wrench, and 4 fans;

    3. Access control system

    1

    Iris/Fingerprint/Card Terminal

    8" LCD with a resolution of 1280 × 800.

    2-MP CMOS dual-lens camera.

    Supports 100,000 users (including up to 50 administrators), 100,000 faces, 500,000 cards, 100,000 passwords, 10,000 fingerprints, and 300,000 records.

    Multiple unlock methods including face, IC card, password, fingerprint and QR code. You can configure scheduled unlock methods, or combine them to create your own personal unlock methods.

    Recognizes faces 0.3 m to 3 m away (0.98 ft-9.84 ft), and is suitable for recognition of people with a height of 0.9 m to 2.4 m (2.95 ft–94.49 ft).

    Adopts deep learning face recognition algorithms to accurately recognize more than 360 key points of a target's face, offers contactless passage and performs face recognition at 0.2 sec/person.

    Supports face mask detection.

    Displays video and image advertisements.

    Recognizes up to 6 human faces at the same time.

    Supports person management on the webpage, including adding, deleting and editing persons.

    Compatible with multiple platforms such as DSS Professional, Smart PSS Lite and DMSS.

    2

    Magnetic Lock

    Power on-NC;

    Single Door;

    Relay Input & output;

    Anti-pool 500kg;

    Working Temperature: -30℃~60℃

    3

    Lock Bracket

    Fix magnetic lock on door frame;

    Working Temperature: -30°C~+60°C

    4

    Exit Button

    Stainless steel;

    86*86*25mm;

    DC12V;

    -30℃-+60℃

    5

    Enrollment Station

    1.PC material and acrylic panel suitable for indoor use.

    2. Support IC card (Mifare card), ID card issuing, and fingerprint collection

    3. USB2.0 interface. Plug and play, no need to install driver.

    4. LED indicator and buzzer prompt for successful card issuing and fingerprint collection.

    5. Supports Smart PSS lite and DSS Pro platforms.

    6. Suitable for parks, high-end office buildings, financial buildings, insurance buildings, schools, factories, venues, CBD business centers, high-end residential areas, high-level government departments, maritime safety bureaus, etc.

    6

    Installation auxiliary materials

    Network cables and connectors, Power cables and connectors

    4.Furniture

    1

    Desk and Chair for students

    Seat panels, front row back panels, middle row back panels, writing boards and shelves

    1. The seat board is made of high-quality multi-layer board, which is hot-pressed at high temperature. It is natural and environmentally friendly, with a thickness of 15mm. The facing is made of environmentally friendly fireproof board, which is wear-resistant, anti-riot, and has strong resistance and load-bearing capacity. Specifications: length: 450±2mm, width 380±2mm, thickness 15±1mm.

    2. The writing board is made of high-quality MDF hot-pressed at high temperature, which is natural and environmentally friendly. The material is wear-resistant, anti-fouling, strong, and durable. It is simple and elegant, strong and reliable. Specifications: length 1090±2mm,

    Width 350±2mm, thickness 18±1mm.

    3. The backboard is made of high-quality MDF hot-pressed at high temperature, which is natural and environmentally friendly. The thickness is 12mm. The facing is made of environmentally friendly fireproof board, which is wear-resistant, anti-riot, and has strong resistance and load-bearing capacity. Front row specifications: length: 1090±2mm, width 770±2mm, thickness 12±1mm. Middle row specifications: length: 1090±2mm, width 600±2mm, thickness 12±1mm.

    4. The laminate is made of high-quality MDF hot-pressed at high temperature, which is natural and environmentally friendly. The thickness is 15mm. The facing is made of environmentally friendly fireproof board, which is wear-resistant, anti-riot, and has strong resistance and load-bearing capacity. Specifications: Length: 500±2mm, width 240±2mm, thickness 15±1mm.

    Seat fixing assembly, base support assembly and writing board support

    The seat fixing component is made of high-quality hot-rolled plate, molded and welded, with a wall thickness of 3.5mm; the seat support component is made of high-quality pickled plate, molded and welded, with a wall thickness of 4mm, and the surface is protected Rust, antifouling, leaching, electrostatic spraying treatment

    beam

    It is made of t=2mm, 80x40 square tube, welded and refined. The surface is treated with anti-rust, anti-fouling, leaching and electrostatic spraying.

    chair legs

    The chair legs are 262mm±10 long, 36mm±2 wide, and 732mm±10 high. They are made of 60*30*T1.5 square tubes and T3.0 high-quality hot-rolled plates, molded and welded, and the surface is rust-proof and anti-rust. Decontamination, leaching, and electrostatic spraying treatment of seat panel decorations and foot covers.

    Seat plate decoration parts are made of ABS material, molded, beautiful and elegant

    Seat return mechanism

    The seat cushion's flip recovery adopts a spring damping recovery mechanism, and the flip central axis is connected with φ 10mm and 45# steel rivets, making the structure solid and durable. It is light and fast in recovery, no impact, no noise, durable and does not fail. Using spring plus hydraulic damping automatic return system, precise positioning and zero return noise.

    The foot cover is made of high-quality PP material and molded in one piece. Length: 240mm, width 45mm, height 52.5mm.

    Main specifications

    The total length is 1090±5mm (the total length of three seats is 1620mm), the total seat height is 783±10mm,

    Seat height: 440±10mm, writing board height: 750±10mm.

    Minimum spacing: 900mm, no arc allowed

    2

    Teacher Smart podium

    1. The cover door adopts a flipping method, which is a more user-friendly design.

    2. Reasonable size design, reasonable equipment arrangement, national standard 19-inch rack, truly anti-theft function.

    3. Steel and wood combined materials are integrated into one piece; the table body is made of 1.2-1.5MM high-quality cold-rolled steel plate and solid wood armrests; the yellow wooden table top is scratch-resistant; the fully enclosed structure ensures the safety of multimedia equipment.

    4. Only one pair of slide rails is used for the entire podium to reduce the chance of failure.

    5. The LCD monitor adopts a flip design, and the angle of the monitor can be adjusted arbitrarily, so that the line of sight and the monitor are nearly vertical. A 17-24-inch monitor can be installed. After closing, all equipment is hidden in the podium.

    6. The keyboard adopts flip-up operation, and the display, central control system and keyboard operate independently without affecting each other.

    7. The drawer on the right side adopts a hidden pull-out design, which can be used to place a physical display stand.

    8. The lectern body adopts a small cabinet door design that can be opened and closed. You can play CDs through the computer optical drive without opening the large cabinet door.

    9. Desktop reserved integrated notebook interface module (two USB/one VGA/one network interface/one AUDIO/one power interface/one microphone interface. (optional)

    10. The lower part of the desk adopts a standard cabinet design with shelves, which can be adjusted at will.

    5.Decoration

    1

    Ceiling works

    600*600*14

    2

    Wall cladding and sound attenuation works

    2400*600*15mm

    3

    Flooring works

    500*500*8mm

    4

    Curtain

    Curtain

    5

    Recessed type Lighting fixture

    The illumination value is not less than 500lx;Recessed type Lighting fixture, emergency lights and power outlet work or LED

    6

    LOGO customization

    LOGO customization

    7

    Cat 6 Full Copper cable

    Cat 6 Full Copper cable

    8

    Electrical Power Outlets

    Electrical Power Outlets

    9

    Sound system accessories

    Sound system including accessories

    10

    Electrical system

    accessories

    Electrical system including accessories

      

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     Bill of Material

    NO.

    NAME

    UNIT

    QTY

    Unit Price +VAT

    Total Price +VAT

    Part 1. Access control system

     

     

     

     

    1.1.Entry and exit vehicle control system

     

     

     

     

    1

    Vehicle barrier, right and left and Pole, 4 meters to the right and left

    Set

    6

     

     

    2

    Include Anti-smash radar, camera stands, LED display and Six 1.2m pole for both Main Gate, Tony Gate and Marmarsa Gate.

    Set

    6

     

     

    3

    Entrance and exit cameras

    Pcs

    6

     

     

    1.2. Sidewalk gate system

     

     

     

     

    1

    Speed Gate Left and Right for both Main Gate, Tony Gate and Marmarsa Gate.

    Pcs

    12

     

     

    2

    Speed Gate Middle

    Pcs

    9

     

     

    3

    Face/Fingerprint/Card Terminal for the speed gate above

    Pcs

    15

     

     

    4

    Bracket

    Pcs

    15

     

     

    1.3. Visitor authentication system

     

     

     

     

    1

    Visitor Terminal

    SET

    2

     

     

    2

    Baggage security checker

    SET

    1

     

     

    3

    Security inspection machine monitor table

    SET

    1

     

     

    4

    Security gate

    SET

    1

     

     

    5

    Security machine entrance table

    SET

    1

     

     

    1.4.Solar Power system for three Gates

     

     

     

     

    1

    Solar System-5.0KW

    Set

    3

     

     

    2

    Lithium iron phosphate battery

    Set

    6

     

     

    3

    Photovoltaic modules

    pcs

    24

     

     

    4

    Photovoltaic module packaging

    Set

    3

     

     

    5

    Photovoltaic bracket

    Set

    3

     

     

    6

    Photovoltaic cable

    M

    300

     

     

    7

    MC4 connector

    pcs

    48

     

     

    8

    AC distribution box

    pcs

    3

     

     

    9

    RVV3*2.5

    m

    600

     

     

    10

    Accessories

    Set

    1

     

     

    1.5. Network and Management

     

     

     

     

    1

    28-Port Managed Gigabit Switch with 24-Port

    pcs

    1

     

     

    2

    Cat6A UTP Cable

    roll

    2

     

     

    3

    2U Server

    PCS

    1

     

     

    4

    Management software

    set

    1

     

     

    5

    Single Mode Fiber Optic Cable (indoor/Outdoor) with installation and terminations to the Staffs Apartments

    Meter

    6000

     

     

    6

    48 x 10/100/1000Base-T (PoE+) ports, 4 x 10GE SFP+ ports

    Pcs

    4

     

     

    7

    24 x 10/100/1000Base-T (PoE+) ports, 4 x 10GE SFP+ ports

    Pcs

    4

     

     

    8

    All Accessories for Access Control System

    set

    1

     

     

    Part 2. Campus information release system

     

     

     

     

    2.1. Outdoor screen system

     

     

     

     

    1

    10m2 Outdoor full color screen with all accessories

    Set  

    1

     

     

    2

    Air conditioners 18000btu/hr

    Pcs

    2

     

     

    3

    Control System

    SET

    1

     

     

    4

    All Accessories for Outdoor screen system

    Set

    1

     

     

    2.1 Live streaming system

     

     

     

     

    1

    Portable all-in-one acquisition and editing machine

    Pcs

    1

     

     

    2

    Director external console

    Pcs

    1

     

     

    3

    Webcast system

    SET

    1

     

     

    4

    Wireless HD PTZ integrated camera

    Pcs

    2

     

     

    5

    Professional camera tripod

    Pcs

    2

     

     

    6

    wireless microphone

    SET

    1

     

     

    7

    Custom trolley case

    SET

    1

     

     

    PART 3. Smart classroom

     

     

     

     

     

    3.1. Smart classroom

     

     

    1

    86" Interactive Board

    PCS

    4

     

     

    2

    Integrated Cloud Classroom host

    PCS

    4

     

     

    3

    Integrated Normal Classroom Software

    Set

    4

     

     

    4

    Panel hosting omnidirectional hanging wheat

    pair

    8

     

     

    5

    Speaker

    pair

    4

     

     

    6

    HD front camera

    PCS

    4

     

     

    7

    HD rear camera

    PCS

    4

     

     

    8

    Outdoor 8MP Smart Face Recognition and ANPR Camera

    PCS

    5

     

     

    9

    Wireless microphone

    PCS

    4

     

     

    10

    22U Rack

    Pcs

    4

     

     

    11

    Smart Director

    PCS

    4

     

     

    12

    Air conditioners 48000 BTU/h

    PCS

    8

     

     

    13

    Rack Mountable UPS 3KVA with at least 2hours battery run time

    PCS

    4

     

     

    14

    Power distributor

    PCS

    4

     

     

    15

    Fire Extinguisher (3kg)

    PCS

    8

     

     

    16

    Teacher Smart podium

    Pcs

    4

     

     

    17

    Student Table

    Pcs

    200

     

     

    18

    Student and Teacher Chair

    Pcs

    410

     

     

     

    3.2. Classroom Control Center

     

     

    1

    Platform and centralized control center system (including specified sets of requirements)

    SET

    1

     

     

    2

    Server

    Pcs

    1

     

     

    3

    Interactive teaching cloud classroom host

    Pcs

    1

     

     

    4

    Wireless microphone

    Pair

    1

     

     

    5

    Active Speaker

    pair

    1

     

     

    6

    HD PTZ camera

    Pcs

    1

     

     

    7

    Smart Director

    Pcs

    1

     

     

    8

    Air conditioners 36000 BTU/h

    Pcs

    1

     

     

    9

    Power distributor

    Pcs

    1

     

     

    10

    42U server cabinet

    Pcs

    1

     

     

    11

    UPS 6KVA with at least 2hours battery run time

    Pcs

    1

     

     

    12

    Fire Extinguisher (3kg)

    Pcs

    1

     

     

    13

    Server aggregation switch

    Pcs

    1

     

     

    14

    Control Room Table and chair

    Person

    2

     

     

     

    3.3. Decoration of Access control system

     

     

    1

    Ceiling works

    m²

    624

     

     

    2

    Wall cladding and sound attenuation works

    m²

    668

     

     

    3

    Flooring works

    m²

    624

     

     

    4

    Curtain

    Set

    4

     

     

    5

    Security Door with Access Lock

    Set

    4

     

     

    6

    Recessed type Lighting fixture

    SET

    4

     

     

    7

    Emergency exit light

    Set

    4

     

     

    8

    On Air lighting

    Set

    4

     

     

    9

    LOGO customization

    Set

    4

     

     

    10

    Cat 6A Full Copper cable

    roll

    50

     

     

    11

    Electrical Power Outlets

    Set

    4

     

     

    12

    Installation and configuration of the whole smart classroom system including accessories

    Set

    4

     

     

    13

    All required Implementation of Campus Gate Access Control System & Information Release System including installing fiber optic cables to staff’s apartments with all accessories.

    Set

    1

     

     

     4. Training

     

     

     

     

    1

    Training

    Person

    10

     

     

     

     

     

     

     

     

     

     

     

    Evaluation criteria for technical qualification

    Technical evaluation shall be guided by the under listed criteria. Bidder requires baseline technical score of 70 % in order to be considered for financial evaluation. This is Quality Cost Based Selection. The technical score share will be 70% and whereas financial share will be 30%. Bidders with highest consolidated score will be merited the project.   

    Technical Evaluation Criteria for Qualification

    No.

    Criteria

    Max. Score

    Remark

    1

    Company Profile

    35

     

     

    Experience

    §    At least 2 experience Smart classroom system projects (7.5 Point)

    §    At least 2 experience Physical Security system projects (7.5 Point)

    §    At least 1 experience Information release system projects (5 Point)

    Important Note:

    §    Bidders must provide testimonials of completed projects (the completed projects site and address should be clearly specified)

    20

     

    Qualifications and Experience of technical Experts:

    §    Project Manager: Highly skilled in project management and PMP (5 Point)

    §    Minimum of 8 technical engineers/experts, highly skilled and experienced in Smart classroom/Physical Security system/Information release system/Solar Power system projects implementation (5 Point)

    Important Note:

    §    Attach relevant certificates of the project manager and technical experts (CV and credentials)

    §    Team structure and responsibility matrix should be clearly stated (5 Point)

    15

     

    2

    Hardware, Software, Service technical requirements compliance

    35

     

     

    §    Detail technical requirements compliance of equipment and materials (15 Point)  

    §    Software and service compliance (10 Point)

    §    Interoperability compliance, accredited third party certifications

    (It is turnkey solution. Bidders are expected to ensure that “List of Goods and related Services” are comprehensive and complete) (10 Point)

    Important Note:

    §    Falling to do so will result in rejection from the bid

     

     

    3

    Project Proposal, Methodology, Migration and Implementation plan

    20

     

     

    High level design of facilities completeness and clarity:

    §    Smart classroom system

    §    Access control system

    §    Information release system

    §    Power system

    §    Network system

    §    Decoration

    §    Reporting arrangement, change control procedures and risk management procedures

    §    Delivery schedule, scheduling of implementation of activities and Clarity of time frame

    §    The maximum delivery time should be less than 270 days (9 months)

     

     

    4

     Knowledge transfer and experience sharing

    10

     

     

    § Local and Onsite training, provide the detailed training subjects and schedule

     

     

    5

    Must Meet Criteria

     

     

    The Bidder must have at least five (5) years of direct experience providing similar solution

    Mandatory

    Tender Specific Manufacturer Authorization Form (MAF). MAF and collaboration shall be subjected to confirmation by the manufacture

    Mandatory

    Datasheet

    Mandatory

    Product Catalogue

    Mandatory

    Compliance table

    Mandatory

    BoQ without Price in your technical Document

    Mandatory

    Post deployment executions: 2-years warranty (Replace or repair) and 2 –years support after acceptance

    N.B. If the manufacture default warranty is more than two years; the default manufacturer warranty shall be considered.  

    Mandatory

    Site Survey

    Mandatory

    Important note:

    o Bidders are expected to carefully see and submit the technical admissibility criteria on the bidding document

    o As the project is on turnkey basis, partial offer will be automatically rejected

    o Visits of completed projects and demonstrations will be part of technical evaluations 

    Total

    100

     

     

     

     

     

     

     

     

     

    The following criteria are mandatory for technical evaluation

    ·        Tender Specific Manufacturer Authorization Form (MAF). MAF and collaboration shall be subjected to confirmation by the manufacturer.

    ·        Data sheet

    ·        Compliance table

    ·        Post deployment executions: minimum of 2-year warranty (Replace or repair) and 2 –year support after acceptance Note: If the manufacture default warranty is more than two years; the default manufacturer warranty shall be considered.  

    ·        Site Survey (Original site survey letter offered by the university should be attached to the technical document)

    Note:

    ·        Bidders are expected to carefully see and submit the technical admissibility criteria on the bidding document

    ·        As the project is on turnkey basis, partial offer will be automatically rejected

    ·        Standardized and state of the art implementation will never be compromised

    ·        Failure to submit Mandatory Criteria will result automatic rejection from the bid. 

    ·        Bidder should clearly indicate their realizable delivery date.

    ·        It is two envelopes tender. It is mandatory to submit separate technical and financial proposal.

    ·        It is mandatory to attach bill of materials without price with your technical document 

    ·        The winner company must submit and present detail low level Design (LLD) after the award & contract signing.

    ·        2-year warranty support and service (repair and replace) should be provided.

     

    (Ref: Chapter 6: Statement of Requirements)

LegalQualification

  • •VAT registration certificate for Domestic Bidders:

    Having been submitted VAT registration certificate issued by the tax authority (in case of contract value of Birr 100,000.00 and above) in accordance with ITB Clause  4. 6(b)(ii)

    (Ref: 4.6(b)(ii))
  • •Bidder Nationality :

    Nationality in accordance with ITB Sub-Clause 4.2

    (Ref: 4.2)
  • •Valid business license :

    Having been submitted valid trade license or business organization registration certificate issued by the country of establishment in accordance with ITB Clause 4.6(b)(i)

    (Ref: 4.6(b)(i))
  • •Conflict of interest :

    No conflict of interest as described in ITB Clause 4.3

    (Ref: 4.3)
  • •Debarred by a decision of the Public Procurement and Property Authority:

    Bidder has been debarred by a decision of the Public Procurement and Property Administration Agency from participating in public procurements for breach of its obligation under previous contracts, in accordance with ITB Clause 4.4.

    (Ref: 4.4)
  • •Form Data on Joint Ventures:

    In the case of a bid submitted by a joint venture (JV), the Bidder has failed to submit the Form Data on Joint Ventures, the Agreement governing the formation of joint venture, or letter of intent to form JV, including a draft agreement, in accordance with ITB Clause 4.1

    (Ref: 4.1)
  • •Valid tax clearance certificate for Domestic Bidders :

    Having been submitted valid tax clearance certificate issued by the tax authority (Domestic Bidders Only) in accordance with ITB Clause 4.6(b)(iii)

    (Ref: 4.6(b)(iii))

ProfessionalQualification

  • •Personnel for the key positions:

    Among the staff mentioned in Sub-Clause 2.1 Bidder must demonstrate that it will have the personnel for the key positions that meet the following requirements;

    (Ref: 37.3 (b))
  • •Number of staff:

    At least staff currently work for the Bidder.

    (Ref: 37.3 (a))

Bid Security

Amount: 500000 ETB

SME Bid Security Form: Letter_from_Small_and_Micro_Enterprise

Foreign Bidders Form: Bank/Wire Transfer

Local Bidders Form: Bank/Wire Transfer, Bank_Guarantee

Terms and Conditions

ከላይ በተጠቀሰው ዝርዝር ጨረታው አሸናፊ የማጓጓዣ ወጪውን ሸፍኖ ድሬዳዋ ዩኒቨርሲቲ ቅጥር ግቢ ድረስ ማቅረብ የሚጠበቅበት ሲሆን ይህን ከግምት ውስጥ በማስገባት እንዲወዳደሩ ይጠበቃል፡፡  ጨረታው አሸናፊ ዩኒቨርሲቲው በሚመድበው ባለሙያ የአቅርቦቱን ትክክለኛነት አስመርምሮ ያስረክባል፡፡ በመጫን እና በማጓጓዝ ሂደት ላይ የጥራት ችግር ካለ አቅራቢው ኃላፊነቱን ይወስዳል፡፡ የጎደለ ወይም ከስፔስፊኬሽን (መስፈርት) ውጪ የሆኑ አቅርቦቶችን አሸናፊው በራሱ ወጪ ይመልሳል፡፡
Save Tender