Lot 3:Procurment of Different Types of Asphalt(Bitumen)
Ethiopian Road Administration
Tender Information
| Title | Lot 3:Procurment of Different Types of Asphalt(Bitumen) |
| Description | Lot 3:Procurment of Different Types of Asphalt(Bitumen) |
| Procuring Entity | Ethiopian Road Administration |
| Reference No | ERA-ICB-G-0038-2017-BID |
| Procurement Method | Open |
| Submission Deadline | 2025-05-21 10:00:00 |
| Invitation Date | 2024-12-02 00:00:00 |
| Procurement Type | Bidding |
| Award Type | two envelop |
Contact Information
| Physical Address: | Ras Abebe Aregay, Room 105 Addis Ababa, Ethiopia |
| Contact Details: | Tel: +251 115587165 Email: eragoodsprocurement@gmail.com |
| Mailing Address: | P.O. Box 1770, Postal Code: 1000 |
LegalQualification
- •Nationality : Nationality in accordance with ITB Clause 4.2. (Ref: 4.2)
- •Form Data on Joint Ventures:
n the case of a bid submitted by a joint venture (JV), the Bidder has failed to submit the Form Data on Joint Ventures, the Agreement governing the formation of joint venture, or letter of intent to form JV, including a draft agreement, in accordance with ITB Clause 4.1
(Ref: 4.1) - •Conflict of Interest: No conflict of interest as described in ITB Clause 6. (Ref: 6)
FinancialQualification
- •External Audit Reports:
Bidder MUST submit external audit reports (not financial statements) certified by an independent auditor for the last Three (3) Years. For Ethiopian Bidders, the audit reports MUST be prepared by certified auditors (not accountants or accounting firms).
(Ref: External Audit Reports) - •Average Annual Turnover:
Bidders need to demonstrate an average annual turnover of at least this amount, usually over the last three years, to meet this financial qualification criterion must be an average of 11,859,000 USD or 1,500,000,000 (1.5 billion) Ethiopian Birr or other similar amount of freely Convertible Foreign Currency.
(Ref: 37.5 (d)) - •Financial Resources: "The Bidder must demonstrate access to, or availability of, financial resources such as liquid assets, unencumbered real assets, lines of credit, and other financial means, other than any contractual advance payments to meet the following cash-flow requirement: " (Ref: 37.5 (e))
- •Historical Financial Performance: "Submission of audited balance sheets and other financial statements as required in the BDS Clause 17, for the last years to demonstrate the current soundness of the Bidder's financial position and its prospective long term profitability" (Ref: 37.5 (b)(c))
TechnicalQualification
- •Article of Association:
Bidder MUST submit a copy of their Article of Association
(Ref: -) - •Submission of Descriptive Technical Literature:
•Bidder MUST submit comprehensive descriptive technical literature for the offered product.
(Ref: -) - •PROPERTIES SAMPLING AND TESTING (Fundamental):
The entire required asphalt grade designated shall conform to the specification requirements shown in the table 1, 2, 3, 4&5 and the final confirmation tests will be carried out in locally available certified laboratory in Addis Ababa after delivery.
(Ref: PROPERTIES SAMPLING AND TESTING (Fundamental)) - •CERTIFICATION(Fundamental):
The manufacturer of the Asphalt shall certify that the unit bid upon meets the requirements of this specification. A copy of the test results shall accompany such certification with a statement saying that the asphalt in the supply has been sampled & tested in accordance with the standard methods of test of AASHTO and/or ASTM by specifying the type of test with the respective standard of type codes. Such certification shall also indicate the date of testing after the floating of this tender and shall be signed & stamped by an authorized agent of the formulator or manufacturer.
(Ref: CERTIFICATION(Fundamental)) - •SCOPE:
It is the intent of these specifications, whether or not specifically mentioned here in, to describe:
Medium curing cut back asphalt MC 30 & MC 3000
Penetration graded asphalt cement 60-70 and 80-100
Rapid Curing RC 70
To be used in the high way pavement and treatment of road surfaces.
(Ref: SCOPE) - •SPECIFICATION WAIVER:
The right is reserved by the Ethiopian Roads Authority to waive compliance on any of these specifications and make awards based upon its best interests.
(Ref: SPECIFICATION WAIVER) - •MANUFACTURE:
The asphalt cement shall be prepared by the refining of crude petroleum by suitable methods.
It shall not show separation or curdling prior to use,
Shall not foam when heated to the application temperature;
The asphalt shall be homogeneous throughout the packing
(Ref: MANUFACTURE) - •SAMPLING AND TESTING:
It shall be confirmed to AASHTO or ASTM relevant standards shown in the 1, 2, 3, 4, 5, 6 &7
The bidder shall be committed to accept testing of their bitumen here in Addis Ababa.
(Ref: SAMPLING AND TESTING) - •PROPERTIES:
The entire required asphalt grade designated shall conform to the specification requirements shown in the table 1, 2, 3, 4, 5,6 and 7
(Ref: PROPERTIES) - •MANUFACTURE:
The asphalt shall show no separation or curdling prior to use.
It shall not foam when heated to the application temperature.
It shall be homogeneous throughout the packing.
(Ref: MANUFACTURE) - •PACKING:
It shall be packed in clean, rust-free steel drums, of minimum6-7mm thickness throughout,
The Net weight of Min. 180 & Max. 220 kg
Drums shall be marked at least with the following:
Description & grade of the asphalt
Gross weight
Net weight of the asphalt
Name of manufacturer
Date of packing
(Ref: PACKING) - •PACKING (Fundamental):
Asphalt shall be packed in clean, rust free steel drums, of at least 0.7 mm thickness throughout and Having net weight of 180 kg to 220 kg
- Drums shall be leak-proof, strong enough to resist impacts and free from Distortions/deformations in the forms of dents, ingress or outguess. Objection ab *e surface
Each Barrel shall be properly and indelibly marked with the following:-
-Description and grade of the designated asphalt
-Gross weight
-Net weight of the asphalt
-Name of the manufacturer
-Name and address of the purchaser
-contract number
-The lot or batch number
-Date of packing
- Pre-delivery inspection of the drums shall be carried out in order to ascertain the conformance of the packing to the above requirements
- Drums which do not comply with the aforementioned requirements shall be totally rejected
- ERA also reserves the right to claim for complete replacement of the drum and its contents, in case of failure of the packing requirements as descried above, during storage within the warranty period
(Ref: PACKING (Fundamental)) - •WARRANTY (Fundamental):
The bidder must guarantee that the asphalt included in the offer shall be non-recycled, unused of high quality and of most recent manufactured production and should further warrant that, the asphalt to be supplied shall meet the technical specification requirements specified herein in conformity with international standards (i.e. AASHTO and/or ASTM).
The bidder shall also guarantee to replace free of charge (including cost of transport, labour and other expenses incurred there of up to ERA warehouse or to the work site), to any of the consignment found not to conform with these international standards stipulated herein and not properly packed as described above under clause 5"PACKING" within the warranty period.
The bidder guarantees that this grade of asphalt for use in road construction, maintenance and treatment pavements is of the required quality. The bidder should also guarantee to replace free of charge if the asphalt fails by reason of defective material or product within twelve (12) months from date of receipt of the goods at the final destination.
(Ref: WARRANTY (Fundamental)) - •WARRANTY:
Asphalt to be supplied shall be of the most recent manufacture/production, non-recycled. (not more than 6 month) The asphalt to be supplied shall not be more than 6 months old from date of manufacture when shipped
The bidder must also guarantee to replace
Consignment found not to conform with stipulated ASTM or AASHTO standards.
Consignment not properly packed as required under clause 6 "packing".
The bidder also guarantees to replace free of charge if the asphalt fails by reason of defective material or product within twelve (12) months from date of receipt of the goods at the final destination.
(Ref: WARRANTY) - •Major relevant contracts successfully completed:
Bidder has to provide in the Bidder Certification of Compliance Form information about major relevant contracts successfully completed in the number and period specified in the BDS
Proof of Satisfactory Execution for contracts they have executed in similar assignments within the last three years, with a minimum average budgetary size of 6,325,000 USD or 800,000,000 (Eight Hundred Million) Ethiopian Birr or other similar amount of freely Convertible Foreign Currency. (Ref: Major relevant contracts successfully completed) - •Submission of Descriptive Technical Literature:
Bidder MUST submit comprehensive descriptive technical literature for the offered product.
(Ref: Submission of Descriptive Technical Literature) - •Signed & stamped Copies of Technical Specification Compliance Sheet:
Bidders must submit Signed & stamped Copies of Technical Specification Compliance Sheet and must write Clause-by-clause commentary to the entire specification requirement.
(Ref: Signed & stamped Copies of Technical Specification Compliance Sheet) - •Certification Letter of Test Result: Bidders must submit Most recent third party quality test result like GEO-CHEM or equivalent (Ref: Certification Letter of Test Result)
- •External Audit Reports::
Bidder MUST submit external audit reports (not financial statements) certified by an independent auditor for the last Three (3) Years. For Ethiopian Bidders, the audit reports MUST be prepared by certified auditors (not accountants or accounting firms).
(Ref: -) - •Onsite Warranty Letter::
Bidder MUST submit an Onsite Warranty Letter guaranteeing to replace defective parts within the warranty period specified in the tender document at the bidder's cost, including transportation and labor to the worksite in Ethiopia. The letter MUST detail the terms and conditions, the process for rectifying faults, and include any extra warranty period documentation.
(Ref: -) - •Certificate of Origin::
Bidder MUST submit a Certificate of Origin, providing documentary evidence certifying the country of origin of the goods being offered.
(Ref: -) - •Manufacturer's Authorization Letter (Original) :
International Bidders and potentially Domestic Bidders (if not the manufacturer) MUST submit an original Manufacturer's Authorization Letter as stated in the tender document. This letter must directly authorize the bidder to supply the specified product, provide warranty, and after-sales service. For Local Agents of Foreign Bidders, this letter MUST be from the foreign manufacturer, authorizing the local agent.
(Ref: -) - •Signed & Stamped Copies of Technical Specification Requirement :
Bidder MUST submit signed and stamped copies of the entire Technical Specification Requirement document, including a clause-by-clause commentary to the entire specification requirement
(Ref: -) - •Signed and Dated Delivery and Completion Schedule :
Bidder MUST submit a signed and dated Delivery and Completion Schedule presented as per the template in Section 6, Statement of Requirements
(Ref: -) - •Bid Security : All bidders are required to submit Bid Security amount of 3,163 USD or 400,000 (Four Hundred Thousand) Ethiopian Birr or other similar amount of freely Convertible Foreign Currency.Bidder MUST submit the bid security in hardcopy to the designated address before the bid submission deadline, using the form attached in this bidding document in the name of Ethiopian Roads Administration. The bid security MUST be an unconditional bid security in the form of a CPO (Certified Payment Order), Bank Guarantee, or Bid Bond. (Ref: -)
- •Written Power of Attorney of the Signatory of the Bid:
Bidder MUST submit a written power of attorney of the signatory of the bid, granting the agent the authority to sign contracts and submit bids on behalf of the manufacturer/international company (if applicable).
(Ref: -) - •Signed & Stamped Anti-Bribery Pledge Forms:
Bidder MUST submit signed and stamped Anti-Bribery Pledge Forms, including an Anti-Bribery/Corruption Declaration confirming their commitment to ethical business practices.
(Ref: -) - •Joint Venture Agreement (if applicable):
If the bidder is participating in a joint venture or consortium, they MUST submit the legally binding agreement document as evidence of the partnership.
(Ref: -) - •Agent Representation Agreement:
Bidders acting as agents for a foreign manufacturer MUST submit a formal agreement with the foreign manufacturer, clearly outlining the agent's authority to represent them in the tender, specifying the products covered, stating the geographic region (Ethiopia), and confirming the manufacturer's commitment to fulfilling the contract if awarded.
(Ref: -) - •Original Manufacturer Technical Booklet, Data Sheet, and/or Brochure:
Bidder MUST submit the original manufacturer's technical booklet, data sheet, and/or brochure which describes the product specification, characteristics, and test results in detail, including all standard and optional equipment with references to recognized international standards.
(Ref: -) - •Manufacturer's Quality and Safety Certifications:
• Manufacturer's Quality and Safety Certifications: Bidder MUST submit authentic and valid Manufacturer's Quality and Safety Certifications from accredited international bodies like ISO, CE, ASTM, DIN, JIS, TUV, or equivalent, for the offered product. The certificates MUST include certificate numbers and the address of the accreditation body.
(Ref: Manufacturer Certification ) - •Memorandum Association:
Bidder MUST submit a copy of their Memorandum Association.
(Ref: -)
Bid Security
Amount: 400000 ETB
Foreign Bidders Form: Bank/Wire Transfer, Bank_Guarantee
Local Bidders Form: Bank/Wire Transfer, Bank_Guarantee
