Tender Detail

Tender Details

  • Company Ethiopian Roads Administration
  • Address RAS ABEBE AREGAY STREET, ADDIS ABABA, Ethiopia, Phone: +251115530423
  • Website
  • Deadline21 May 2025, 3:00 PM
  • magazineEGP
  • CountryEthiopia
  • Official noticeproduction.egp.gov.et
  • Bid Document PriceNot stated in the notice
  • Bid Security300000
  • opening date2025-05-21 15:30:00
  • Sector Goods

Procurement of Temporary Steel Panel Bridges

Ethiopian Roads Administration


Tender Information

TitleProcurement of Temporary Steel Panel Bridges
DescriptionLot 44:Procurement of Temporary Steel Panel Bridges
Procuring EntityEthiopian Roads Administration
Reference NoERA-ICB-G-0102-2017-BID
Procurement MethodOpen
Submission Deadline2025-05-21 15:00:00
Invitation Date2025-02-27 10:00:00
Procurement TypeBidding
Award Typetwo envelop

Contact Information

Physical Address:Ras Abebe Aregay Street (Main Street) , Room 105
Addis Ababa, Ethiopia
Contact Details:Tel: +251 115587165
Email: getanehb6@gmail.com
Mailing Address:P.O. Box 1770, Postal Code: 1770

LegalQualification

  • •Conflict of Interest: No conflict of interest as described in ITB Clause 6. (Ref: 6)
  • •Form Data on Joint Ventures:

    n the case of a bid submitted by a joint venture (JV), the Bidder has failed to submit the Form Data on Joint Ventures, the Agreement governing the formation of joint venture, or letter of intent to form JV, including a draft agreement, in accordance with ITB Clause 4.1

    (Ref: 4.1)
  • •Nationality : Nationality in accordance with ITB Clause 4.2. (Ref: 4.2)

TechnicalQualification

  • •Certificates of satisfactory execution of contracts: The Bidder has successfully completed at least contracts with a budget of at least that of this contract in the past years (Ref: 16.3 )
  • •Delivery and Completion Schedule:

    Bidder has to fill and submit Delivery and Completion Schedule

    - Must be presented as per the template in the Statement of Requirements (Section 6).

    - Must be signed and dated by an authorized representative of the bidder.

    - Must include realistic delivery and completion timelines.

    (Ref: 37.4(e))
  • •History of non-performing contracts: Non-performance of a contract did not occur within the last years prior to the deadline for Bid submission, based on all information on fully settled disputes or litigation. A fully settled dispute or litigation is one that has been resolved in accordance with the Dispute Resolution Mechanism under the respective contract, and where all appeal instances available to the bidder have been exhausted. (Ref: 7.3 (d))
  • •Pending litigation: All pending litigation shall in total not represent more than percent of the Bidder’s net worth and shall be treated as resolved against the Bidder. (Ref: 37.3 (e))
  • •Equipment for the implementation of the contract: "The Bidder must demonstrate that it will have available for the implementation of the contract the following equipment listed hereafter: Equipment Type and Characteristics and Minimum Number Required " (Ref: 37.3 (f)(g))
  • •Company's Memorandum of Association:

    - Must be a certified copy of the original document.

    - Must clearly outline the company's objectives and structure.

    (Ref: Company's Memorandum of Association)
  • •Commentary to Technical Specifications:

    - Must provide additional information relevant to the steel bridge construction technology.

    (Ref: Commentary to Technical Specifications)
  • •Warranty Documentation:

    - Must be a formal document outlining the 12-month warranty terms.

    - Must clearly specify the coverage and procedures for claiming warranty services.

    (Ref: Warranty Documentation)
  • •Documentation of International Supply Experience:

    - Must provide evidence of previous international supply contracts.

    (Ref: Documentation of International Supply Experience)
  • •Certification Documents (ISO & Material):

    - ISO Certification for Material Galvanization: Must be issued by an internationally recognized certifying agency.

    - Must demonstrate compliance with the specified galvanization standards.

    - Material Type and Strength Certification: Must include chemical composition details.

    - Must demonstrate compliance with AASHTO standards.

    (Ref: (ISO & Material))
  • •Manufacturer Authorisation Letter:

    Bidder has to submit Manufacturer Authorization Letter in accordance with ITB Clause 5.6.

     -Must be issued by the manufacturer.

    - Must clearly authorize the bidder to represent them in the tender.

    - Must specify the products and services covered.

    (Ref: 37.4(iii))
  • •Submission of Descriptive Technical Literature:

    - Must provide detailed technical information about the offered bridges.

    - Must clearly demonstrate compliance with the technical specifications.

    (Ref: Descriptive Technical Literature)
  • •Written Power of Attorney:

    - Must be a legal document authorizing the signatory to sign contracts and submit bids.

    - Must be issued by the manufacturer (if applicable).

    (Ref: Power of Attorney)
  • •Year of Manufacture Proof:

    - Must provide documentation confirming the bridges will be manufactured in 2024/2025.

    (Ref: Year of Manufacture Proof)
  • •Signed & Stamped Copies of Technical Specification Requirements:

    - Must be signed and stamped by an authorized representative of the bidder.

    - Must confirm the bidder's acceptance of all technical specifications.

    (Ref: Technical Specification Requirements)
  • •Relevant Professional Practice Certificate/Past Experience (for local agents of foreign bidders):  Must provide evidence of three similar contracts in the past three years. Must demonstrate experience in handling similar import/export projects. Must provide contact information for references. (Ref: Relevant Professional Practice Certificate)
  • •Origin of Goods and Related Services:

    - Must clearly state the country of origin of the goods and related services.

    (Ref: Origin of Goods and Related Services)
  • •Authorization Letter:

    Authorization Letter in accordance with ITB Clause 5.6

    - Must be issued by the company.

    - Must clearly authorize the representative to submit the bid.

    (Ref: 5.6)
  • •Article of Association:

    - Must be a certified copy of the original document.

    - Must outline the rules governing the internal management of the company.

    (Ref: Article of Association)
  • •Technical Proposal:

    - Must demonstrate compliance with all technical specifications.

    - Must include detailed calculations for load reactions, fatigue analysis, etc.

    - Must include detailed dimensions of recommended abutments and piers.

    (Ref: Technical Proposal)
  • •Manuals and Drawings:

    - Must include detailed identification manual, erection/launching procedures, and engineering drawings.

    (Ref: Manuals and Drawings)
  • •Pre-shipment Inspection and Training Program:

    - Must include detailed description, trainer qualifications, and training materials.

    (Ref: Pre-shipment Inspection and Training Program)
  • •Agent Representation Agreement:

    - Must specify products, geographic region, and manufacturer's commitment.

    (Ref: Agent Representation Agreement)

FinancialQualification

  • •Historical Financial Performance: "Submission of audited balance sheets and other financial statements as required in the BDS Clause 17, for the last years to demonstrate the current soundness of the Bidder's financial position and its prospective long term profitability" (Ref: 37.5 (b)(c))
  • •Financial Resources: "The Bidder must demonstrate access to, or availability of, financial resources such as liquid assets, unencumbered real assets, lines of credit, and other financial means, other than any contractual advance payments to meet the following cash-flow requirement: " (Ref: 37.5 (e))
  • •External Audit Reports (last 3 years):

    - Must be certified by an independent auditor (not accountant/accounting firm for Ethiopian bidders).

    - Must cover the last three fiscal years.

    - Must demonstrate the bidder's financial stability.

    (Ref: Audit Reports )
  • •Average Annual Turnover:

    The average annual turnover calculated as total certified payments received for contracts in progress or completed within the last years must exceed times the amount of the financial proposal of the Bid.100,000,000(Local Agent of Foreign Bidder)

    (Ref: 37.5 (d))

Bid Security

Amount: 300000 ETB

Foreign Bidders Form: Bank_Guarantee, Bank/Wire Transfer

Local Bidders Form: Bank_Guarantee, Bank/Wire Transfer

Terms and Conditions

N/A
Save Tender