Tender Detail

Tender Details

  • Company Jinka University
  • Address , Phone: +251923700504
  • Website
  • Deadline16 Nov 2025, 4:00 PM
  • magazineEGP
  • CountryEthiopia
  • Official noticeproduction.egp.gov.et
  • Bid Document PriceNot stated in the notice
  • Bid Security200000
  • opening date2025-11-16 16:30:00
  • Sector Goods

Procurement of Integrated Charger

Jinka University


Tender Information

TitleProcurement of Integrated Charger
DescriptionProcurement of Integrated Charger
Procuring EntityJinka University
Reference NoJKU-NCB-G-0020-2018-BID-Open
Procurement MethodOpen
Submission Deadline2025-11-16 16:00:00
Invitation Date2025-10-27 00:00:00
Procurement TypeBidding
Award Typesingle envelop

Contact Information

Physical Address:Jinka, Room 102
Jinka, Ethiopia
Contact Details:Tel: +251 912420661
Email: basorc19@gmail.comegp
Mailing Address:P.O. Box 165, Postal Code: -

PerformanceQualification

  • • Bidder :

    Bidder should supply, transport, install, test, and commission in all specified sites, and allocate adequate man power and machinery.

    (Ref: ITB)
  • • trade license:

    The bidders shall fulfill relevant trade license for the assignment according to the national by-laws and decrees.

    (Ref: ITB)
  • •Site :

    Site assessment is must

    (Ref: ITB)
  • •Bidders :

    Bidders must meet the specifications. 

    (Ref: itb)
  • •document :

    Each page of the offer document shall be properly signed and stamped

    (Ref: itb)
  • •Training :

    The training will be split into three major components: System installation, system operation and maintenance and demand side management. User training should be provided to the users at each installed site. Bidders must demonstrate a comprehensive understanding of the equipment fundamentals. Proficiency in installation practices, safety protocols, and the permitting process is essential. Additionally, bidders must exhibit skills in performance monitoring, maintenance procedures, and troubleshooting.  

    (Ref: ITB)
  • • Contractor :

    The Contractor shall install in the system room warning signs for general and personal safety.  

    (Ref: ITB)
  • •The bidders should specify .:

    The bidders should specify material brand name, model, manufacturer company name and origin of country.

    (Ref: ITB)
  • • Manufacturer’s authorization:

    Bidders must provide datasheets of each item; and provide Manufacturer’s authorization letter, ISO, TUV CE, TR25, CCC Certification, and Test report for each item from an authorized institution (accredited laboratory) with their submission

    (Ref: ITB)

LegalQualification

  • •valid business license:

    Bidder has to submit valid business license indicating the stream of business in which the bidder is engaged in accordance with ITB Clause 4.6(b)(i);

    (Ref: ITB 35.2)
  • •conflict of interest:

    Bidder is found to have a conflict of interest as described in ITB Sub-Clause 4.3

    (Ref: ITB 35.2)
  • •Nationality:

    Bidder's have nationality in accordance with ITB Sub-Clause 4.2.

    (Ref: ITB 35.2)
  • •Power of Attorney:

    Valid power of attorney signed by the authorized personnel shall be submitted

    (Ref: ITB)
  • •VAT registration certificate:

    Bidder has to submit VAT registration certificate issued by the tax authority (in case of contract value specified in BDS Clause 4.6(b)(ii)

    (Ref: ITB 35.2)
  • •valid excise tax registration certificate:

    For procurements of goods and services subject to excise tax, to submit a valid excise tax registration certificate;

    (Ref: ITB 35.2)
  • •valid tax clearance certificate:

    Bidder has to submit a valid tax clearance certificate issued by the tax authority in accordance with ITB Clause 4.6(b)(iii);

    (Ref: ITB 35.2)

FinancialQualification

  • •Annual turnover:

    When the annual turnover submitted by the bidder is not less than the average annual turnover specified in the bid document.

    (Ref: ITB 35.5)
  • •other documents proofing its financial standing:

    Bidder has to submit other documents proofing its financial standing, as required in the BDS Clause 15.2(b)

    (Ref: ITB 35.5)
  • •financial statements certified by an independent auditor :

     Bidder has to submit financial statements certified by an independent auditor as required in ITB Clause 15.2(a) for the period specified.

    (Ref: ITB 35.5)

ProfessionalQualification

  • •Site assessment :

    The bidder must conduct site visit within 5 (five) days of bid announcement and attach signed Site visit form given from the employer accordingly. 

    (Ref: ITB)
  • • Number of staff :

    At least 4 (four) electrical or electromechanical engineers with BSc., degree or higher educational qualification currently working for the applicant. The bidder shall provide supporting document (i.e. employment agreement document, payroll for the staff that indicates its financial payment for the last three months) so that it will confirm that the above staff are indeed working for the Contractor. 

    (Ref: ITB)
  • • History of non performing contracts :

    Non-performance of a contract did not occur within the last 5 years prior to the deadline for Bid submission, based on all information on fully settled disputes or litigation. A fully settled dispute or litigation is one that has been resolved in accordance with the Dispute Resolution Mechanism under the respective contract, and where all appeal instances available to the bidder have been exhausted Bidder Should submit his supportive evidence.  

    (Ref: ITB)
  • •Pending litigation :

    All pending litigation shall in total not represent more than 10 percent of the Bidder's net worth and shall be treated as resolved against the Bidder. Bidder Should submit his supportive evidence A consistent history of litigation or arbitration awards against the Applicant or any partner of a Joint Venture may result in disqualification. 

    (Ref: ITB)
  • • Material brand Name :

    The bidders Must specify material brand name, model, manufacturer company name and origin of country. 

    (Ref: ITB)
  • •Information related to its professional qualification:

    Bidder has failed to provide in the Bidder Certification of Compliance Form information related to its professional qualification and capability for the period specified in the BDS Clause 14.1;

    (Ref: ITB 35.3)
  • •Relevant professional practice certificates:

    Bidder has to submit relevant professional practice certificates, if required in BDS Clause 4.6(b)(iv);

    (Ref: ITB 35.3)
  • • Work methodology and scheduling :

    Planning, scheduling and methodology to supply, installation, testing and commissioning. The better performance gets full mark, while other bidders' scores will be calculated proportionally. Training delivery and methodology. The better training delivery and methodology will get full mark, while other bidders' scores will be calculated proportionally. 

    (Ref: ITB)
  • • Provide Detail Training Schedule and documentation :

    System installation, system operation and maintenance and demand side management. The bidder should provide detailed training schedule, and attach clear catalog of the products 

    (Ref: ITB)
  • • Technical Expertise:

    One Project Manager: with a minimum of BSc. degree in electrical or electromechanical engineering, at least five (5) years of total work experience.

    One Site Engineer: one site engineer, with a minimum of BSc. degree in electrical or electromechanical engineering, at least three (3) years of total work experience.

    Two Electricians: each with a minimum of BSc. degree in electrical engineering, at least two (2) years total work experience. Technical experts who have maximum educational background and maximum work experience in related system projects will get full point, while other bidders' scores will be calculated proportionally. Technical experts must attach work experience, and confirm their status as legal tax payer by submitting official letter from tax office to validate their work experience.

    (Ref: ITB)
  • •Technical Specification :

    The bidder provides clear and detailed technical parameters and specifications of the requested items 

    (Ref: ITB)
  • • ISO, TUV CE, TR25, CCC Certification:

    The bidder must attach and provide ISO, TUV CE, TR25, CCC Certifications of the products 

    (Ref: ITB)

TechnicalQualification

  • •Inspections and commissioning Tests:

    The following inspections and commissioning tests shall be performed: -

    - Tests for proper installation for the main apparatus and the complementary stands, as well as, product commissioning shall be conducted by authorized and responsible parties. Inspect all sets of goods and materials incorporated are new, unused, and of the most recent or current models, and check for recent improvements and amendments whether incorporate in design of the supply. 

    (Ref: ITB)
  • •Warranty:

    Bidder has to submit Description of the organization of the warranty offered in accordance with the conditions laid down in GCC Clause

    Bidders must provide warranties and guarantees for the equipment. Bid respondent shall fully define in its document the warranty offered. Bidders must meet warranty requirements with the following  The bidder should provide the warranty for One year (1year)  Should any faults arise, this warranty shall be covered for the necessary maintenance free of charge for one (1) year.

    (Ref: ITB 35.4)
  • •Documentation and operation manual:

    Successful bidders should have to provide manufacturer’s documents of technical specifications, maintenance and operation, and users manuals of each equipment installed. List of installed components including spare parts, tools, associated manufactures literature and warranty claim should be handed over to users of installed equipment.

    (Ref: ITB)
  • •Technical Specification + Technical Offer+ Compliance Sheet:

    Bidder has failed to complete its Technical Specification + Technical Offer+ Compliance Sheet Form in accordance with technical specification presented as per template in Section 6, Statement of Requirements .

    (Ref: ITB 35.4)
  • •Certificates of satisfactory execution of contracts:

     Bidder has to submit Certificates of satisfactory execution of contracts provided by contracting parties to the contracts successfully completed in the period and budget as specified in the BDS Clause 16.3;

    (Ref: ITB 35.4)
  • •Information about major relevant contracts successfully completed :

    Bidder has failed to provide in the Bidder Certification of Compliance Form information about major relevant contracts successfully completed in the number and period specified in the BDS

    (Ref: ITB 35.4)
  • •origin of the Goods and Related Services :

    Bidder has failed to provide in the Bid Submission Sheet Form the Statement attesting the origin of the Goods and Related Services offered

    (Ref: ITB 35.4)
  • •Delivery and Completion Schedule:

    Bidder has failed to submit dated Delivery and Completion Schedule presented as per template in Section 6, Statement of Requirements

    (Ref: ITB 35.4)
  • •Manufacturer Authorization Letter :

    Bidder has to submit Manufacturer Authorization Letter in accordance with ITB Clause 5.6.

    Bidders must provide datasheets of each item; and provide Manufacturer’s authorization letter, ISO, TUV CE, TR25, CCC

    (Ref: ITB 35.4)

Bid Security

Amount: 200000 ETB

SME Bid Security Form: Letter_from_Small_and_Micro_Enterprise

Foreign Bidders Form: Bank_Guarantee, CPO

Local Bidders Form: Bank_Guarantee, CPO

Terms and Conditions

Jinka University has the right to cancel the Bid partially or fully.
Bidders Must submit CPO in person at Jinka University.
Save Tender