Tender Detail

Tender Details

  • Company Ethiopian Roads Administration
  • Address RAS ABEBE AREGAY STREET, ADDIS ABABA, Ethiopia, Phone: +251115530423
  • Website
  • Deadline27 Aug 2026, 10:00 AM
  • magazineEGP
  • CountryEthiopia
  • Official noticeproduction.egp.gov.et
  • Bid Document PriceNot stated in the notice
  • Bid Security300000
  • opening date2026-08-27 10:30:00
  • Sector Goods

Tender T-04-Procurement of Different types of Bitumen

Ethiopian Roads Administration


Tender Information

TitleTender T-04-Procurement of Different types of Bitumen
DescriptionTender T-04-Procurement of Different types of Bitumen
Procuring EntityEthiopian Roads Administration
Reference NoERA-ICB-G-0070-2018-BID-Open
Procurement MethodOpen
Submission Deadline2026-08-27 10:00:00
Invitation Date2026-03-06 03:00:00
Procurement TypeBidding
Award Typetwo envelop

Contact Information

Physical Address:Ras Abebe Aregay, Room 105
Addis Ababa, Ethiopia
Contact Details:Tel: +251 115587165
Email: eragoodsprocurement@gmail.com
Mailing Address:P.O. Box 1770, Postal Code: 1000

LegalQualification

  • • valid business license :   Bidder has failed to submit valid business license indicating the stream of business in which the bidder is engaged in accordance with ITB Clause 4.6(b)(i);

    (Ref: ITB 35.2)
  • •VAT registration certificate:

    Domestic Bidder has to submit VAT registration certificate issued by the tax authority

    (Ref: ITB 35.2)
  • •valid tax clearance certificate: Domestic Bidder has failed to submit a valid tax clearance certificate issued by the tax authority in accordance with ITB Clause 4.6(b)(iii);

    (Ref: ITB 35.2)
  • • conflict of interest : Bidder is found to have a conflict of interest as described in ITB Sub-Clause 4.3

    (Ref: ITB 35.2)
  • •Nationality :

    Bidder does have nationality in accordance with ITB Sub-Clause 4.2

    (Ref: ITB 35.2)
  • •Form Data on Joint Ventures:

    In the case of a bid submitted by a joint venture (JV), the Bidder has failed to submit the Form Data on Joint Ventures, the Agreement governing the formation of joint venture, or letter of intent to form JV, including a draft agreement, in accordance with ITB Clause 4.1

    (Ref: ITB 35.2)
  • •DARA-Authenticated Agency Agreement :

    The Bidder must submit a DARA-Authenticated Agency Agreement between the Foreign Manufacturer and Local Agent.

    (Ref: DARA-Authenticated Agency Agreement )
  • •Consularized Power of Attorney :

    The Bidder shall provide a Consularized Power of Attorney authenticated by the Ethiopian Embassy in the manufacturer's country.

    (Ref: Consularized Power of Attorney )
  • •Agent’s Representation Letter:

    The Bidder must submit an Agent’s Representation Letter detailing technical support capacity.

    (Ref: Agent’s Representation Letter)
  • •Conflict of Interest Declaration and an Anti-Bribery Pledge.:

    The Bidder must submit a Conflict of Interest Declaration and an Anti-Bribery Pledge.

    (Ref: Conflict of Interest Declaration and an Anti-Bribery Pledge.)
  • •Legal Identity Disclosure :

    The Bidder shall provide Legal Identity Disclosure listing Board of Directors and Beneficial Ownership.

    (Ref: Legal Identity Disclosure )

TechnicalQualification

  • •Manufacture :

    The asphalt shall show no separation or curdling prior to use.

    It shall not foam when heated to the application temperature.

    It shall be homogeneous throughout the packing.

    (Ref: 1)
  • •Sampling and Testing:

    It shall be confirmed to AASHTO or ASTM relevant standards shown in the 1, 2, 3, 4, 5, 6 &7

    The bidder shall be committed to accept testing of their bitumen here in Addis Ababa. (Ref: 1)
  • •Specification Waiver :

    The right is reserved by the Ethiopian Roads Authority to waive compliance on any of these specifications and make awards based upon its best interests.

    (Ref: ITB 35.4)
  • • Manufacture :

    The asphalt cement shall be prepared by the refining of crude petroleum by suitable methods.

    It shall not show separation or curdling prior to use,

    Shall not foam when heated to the application temperature;

    The asphalt shall be homogeneous throughout the packing

    (Ref: ITB 34.5)
  • • Scopes :

    It is the intent of these specifications, whether or not specifically mentioned here in, to describe:

    Medium curing cut back asphalt MC 30 & MC 3000

    Penetration graded asphalt cement 60-70 and 80-100

    Rapid Curing RC 70

    To be used in the high way pavement and treatment of road surfaces. (Ref: ITB 35.4)
  • •Manufacturer's Quality and Safety Certifications:

     Manufacturer's Quality and Safety Certifications: Bidder MUST submit authentic and valid Manufacturer's Quality and Safety Certifications from accredited international bodies like ISO, CE, ASTM, DIN, JIS, TUV, or equivalent, for the offered product. The certificates MUST include certificate numbers and the address of the accreditation body.  

    (Ref: 2)
  • •Memorandum Association:

    Bidder MUST submit a copy of their Memorandum Association.  

    (Ref: 2)
  • •Properties Sampling and Testing(Fundamental):  Bidder has to provide in the Bid Submission Sheet Form the Statement attesting the origin of the Goods and Related Services  offered;

    (Ref: ITB 35.4)
  • •Certification(Fundamental):  The manufacturer of the Asphalt shall certify that the unit bid upon meets the requirements of this specification. A copy of the test results shall accompany such certification with a statement saying that the asphalt in the supply has been sampled & tested in accordance with the standard methods of test of AASHTO and/or ASTM by specifying the type of test with the respective standard of type codes. Such certification shall also indicate the date of testing after the floating of this tender and shall be signed & stamped by an authorized agent of the formulator or manufacturer. (Ref: ITB 35.4)
  • •Warranty(Fundamental):

    The bidder must guarantee that the asphalt included in the offer shall be non-recycled, unused of high quality and of most recent manufactured production and should further warrant that, the asphalt to be supplied shall meet the technical specification requirements specified herein in conformity with international standards (i.e. AASHTO and/or ASTM).

    The bidder shall also guarantee to replace free of charge (including cost of transport, labour and other expenses incurred there of up to ERA warehouse or to the work site), to any of the consignment found not to conform with these international standards stipulated herein and not properly packed as described above under clause 5"PACKING" within the warranty period.

    The bidder guarantees that this grade of asphalt for use in road construction, maintenance and treatment pavements is of the required quality. The bidder should also guarantee to replace free of charge if the asphalt fails by reason of defective material or product within twelve (12) months from date of receipt of the goods at the final destination.

    (Ref: 2)
  • • Warranty :

    Asphalt to be supplied shall be of the most recent manufacture/production, non-recycled. (not more than 6 month) The asphalt to be supplied shall not be more than 6 months old from date of manufacture when shipped

    The bidder must also guarantee to replace

    Consignment found not to conform with stipulated ASTM or AASHTO standards.

    Consignment not properly packed as required under clause 6 "packing".

    The bidder also guarantees to replace free of charge if the asphalt fails by reason of defective material or product within twelve (12) months from date of receipt of the goods at the final destination.

    (Ref: 1)
  • •Article of Association:

    Bidder MUST submit a copy of their Article of Association

    (Ref: 2)
  • •Signed & stamped Copies of Technical Specification Compliance Sheet:

    Bidders must submit Signed & stamped Copies of Technical Specification Compliance Sheet and must write Clause-by-clause commentary to the entire specification requirement.

    (Ref: 3)
  • •Certification Letter of Test Result:

    Bidders must submit Most recent third party quality test result like GEO-CHEM or equivalent

    (Ref: 1)
  • •Joint Venture Agreement (if applicable):

    If the bidder is participating in a joint venture or consortium, they MUST submit the legally binding agreement document as evidence of the partnership. 

    (Ref: 2)
  • •Onsite Warranty Letter::

    Bidder MUST submit an Onsite Warranty Letter guaranteeing to replace defective parts within the warranty period specified in the tender document at the bidder's cost, including transportation and labor to the worksite in Ethiopia. The letter MUST detail the terms and conditions, the process for rectifying faults, and include any extra warranty period documentation.  

    (Ref: 1)
  • •Certificate of Origin::

    Bidder MUST submit a Certificate of Origin, providing documentary evidence certifying the country of origin of the goods being offered

    (Ref: 1)
  • •Signed & Stamped Copies of Technical Specification Requirement:

    Bidder MUST submit signed and stamped copies of the entire Technical Specification Requirement document, including a clause-by-clause commentary to the entire specification requirement

    (Ref: 1)
  • •Manufacturer's Authorization Letter (Original):

    International Bidders and potentially Domestic Bidders (if not the manufacturer) MUST submit an original Manufacturer's Authorization Letter as stated in the tender document. This letter must directly authorize the bidder to supply the specified product, provide warranty, and after-sales service. For Local Agents of Foreign Bidders, this letter MUST be from the foreign manufacturer, authorizing the local agent.  

    (Ref: 2)
  • •Signed and Dated Delivery and Completion Schedule:

    Bidder MUST submit a signed and dated Delivery and Completion Schedule presented as per the template in Section 6, Statement of Requirements

    (Ref: 1)
  • •Signed & Stamped Anti-Bribery Pledge Forms:

    Bidder MUST submit signed and stamped Anti-Bribery Pledge Forms, including an Anti-Bribery/Corruption Declaration confirming their commitment to ethical business practices. 

    (Ref: 3)
  • •Agent Representation Agreement:

    Bidders acting as agents for a foreign manufacturer MUST submit a formal agreement with the foreign manufacturer, clearly outlining the agent's authority to represent them in the tender, specifying the products covered, stating the geographic region (Ethiopia), and confirming the manufacturer's commitment to fulfilling the contract if awarded.  

    (Ref: 2)
  • •Original Manufacturer Technical Booklet, Data Sheet, and/or Brochure:

    Bidder MUST submit the original manufacturer's technical booklet, data sheet, and/or brochure which describes the product specification, characteristics, and test results in detail, including all standard and optional equipment with references to recognized international standards.  

    (Ref: 2)
  • •Submission of Certificates of satisfactory execution of contracts:

    Bidder has to submit Certificates of satisfactory execution of contracts provided by contracting parties to the contracts successfully completed in the period and budget as specified in the past three years

    (Ref: 2)
  • •Submission of Descriptive Technical Literature:

    Bidder MUST submit comprehensive descriptive technical literature for the offered product.  

    (Ref: 1)
  • •Nationality Proof for the bidder :

    The Bidder shall provide Nationality Proof for the bidder and all its members.

    (Ref: Nationality Proof for the bidder )
  • •Bid Submission Sheet and a Letter of Bid:

    The Bidder shall provide an Official Bid Submission Sheet and a Letter of Bid, both signed, stamped, and dated.

    (Ref: Bid Submission Sheet and a Letter of Bid)
  • •FOB Port Logistics Plan and an Insurance Commitment Letter :

    The Bidder shall provide a FOB Port Logistics Plan and an Insurance Commitment Letter (for EIC cooperation).

    (Ref: FOB Port Logistics Plan and an Insurance Commitment Letter )
  • •Bidder Certification of Compliance Form :

    The Bidder must submit a Bidder Certification of Compliance Form as per the standard tender format.

    (Ref: Bidder Certification of Compliance Form )
  • • Bid Validity Declaration :

    The Bidder shall provide a Bid Validity Declaration 

    (Ref: Bid Validity Declaration )
  • •Official Seals/Stamps Verification:

    The Bidder shall provide Official Seals/Stamps Verification, ensuring all pages bear the corporate seal of the bidder and manufacturer.

    (Ref: Official Seals/Stamps Verification)
  • •Apostilled Manufacturer’s Authorization Letter (MAA):

    The Bidder must submit an Apostilled Manufacturer’s Authorization Letter (MAA); original, on refinery letterhead, notarized and authenticated by the Ministry of Foreign Affairs.

    (Ref: Apostilled Manufacturer’s Authorization Letter (MAA))
  • •Direct Verification Mandate:

    The Bidder shall provide a Direct Verification Mandate; a notarized letter from the Manufacturer granting ERA authority to verify batch codes and authorization directly with the refinery's legal department.

    (Ref: Direct Verification Mandate)
  • •External Audit Reports::

    Bidder MUST submit external audit reports (not financial statements) certified by an independent auditor for the last Two (2) Years. For Ethiopian Bidders, the audit reports MUST be prepared by certified auditors (not accountants or accounting firms).  

    (Ref: 2)
  • •Major relevant contracts successfully completed:

    Bidder has to provide in the Bidder Certification of Compliance Form information about major relevant contracts successfully completed in the number and period specified in the BDS

    Proof of Satisfactory Execution for contracts they have executed in similar assignments within the last two years, with a minimum average budgetary size of 1,287,545 USD or 200,000,000 (Two Hundred Million) Ethiopian Birr or other similar amount of freely Convertible Foreign Currency. (Ref: 2)
  • •Certificate of Incorporation/Establishment :

    The Bidder must submit a Certificate of Incorporation/Establishment proving the formal establishment of the firm.

    (Ref: Certificate of Incorporation/Establishment )
  • •Valid Business Organization Registration Certificates :

    The Bidder shall provide Valid Business Organization Registration Certificates for both the Principal (Manufacturer) and the local agent.

    (Ref: Valid Business Organization Registration Certificates )
  • •Trade Name Registration Certificate:

    The Bidder must submit a Trade Name Registration Certificate to verify the official brand of the Bitumen.

    (Ref: Trade Name Registration Certificate)
  • •Refinery Technical Representative Contacts :

    The Bidder must submit Refinery Technical Representative Contacts (Official Email & Phone) for the Export Manager.

    (Ref: Refinery Technical Representative Contacts )
  • •Joint & Several Liability Declaration:

    The Bidder shall provide a Joint & Several Liability Declaration signed by both the Manufacturer and the Local Agent.

    (Ref: Joint & Several Liability Declaration)
  • •Refinery Ownership/Legal Status:

    The Bidder must submit Refinery Ownership/Legal Status documents from the home country.

    (Ref: Refinery Ownership/Legal Status)
  • •Manufacturer's Commitment Letter :

    The Bidder shall provide a Manufacturer's Commitment Letter taking sole responsibility for technical quality.

    (Ref: Manufacturer's Commitment Letter )
  • •Refinery Direct Invoice Confirmation:

    The Bidder must submit a Refinery Direct Invoice Confirmation, stating that shipping documents will be issued directly by the refinery, not a middleman.

    (Ref: Refinery Direct Invoice Confirmation)
  • •Non-Relationship Disclosure Affidavit:

    The Bidder shall provide a Non-Relationship Disclosure Affidavit stating no unauthorized third parties or brokers are involved.

    (Ref: Non-Relationship Disclosure Affidavit)
  • •Letter of Commitment for Direct Communication:

    The Bidder must submit a Letter of Commitment for Direct Communication allowing ERA to bypass agents to speak with production managers.

    (Ref: Letter of Commitment for Direct Communication)
  • •Refinery Visit Consent letter :

    The Bidder shall provide a Refinery Visit Consent letter inviting ERA experts to inspect the production line and laboratory.

    (Ref: Refinery Visit Consent letter )
  • •Manufacturing Proof:

    The Bidder must submit Manufacturing Proof certifying asphalt is prepared via industrial distillation of crude petroleum.

    (Ref: Manufacturing Proof)
  • •Refining Method Statement :

    The Bidder shall provide a Refining Method Statement proving the product will not show separation, curdling, or foam when heated.

    (Ref: Refining Method Statement )
  • •Refinery Laboratory Accreditation:

    The Bidder must submit Refinery Laboratory Accreditation (ISO/IEC 17025 or third-party labs like SGS/GEO-CHEM).

    (Ref: Refinery Laboratory Accreditation)
  • •Batch-Specific Test Results:

    The Bidder shall provide Batch-Specific Test Results for all grades offered (60/70, 80/100, MC, RC) per AASHTO/ASTM standards.

    (Ref: Batch-Specific Test Results)
  • •Technical Certification:

    The Bidder must submit a signed Technical Certification (Fundamental) stating the bitumen meets all ERA manual test codes.

    (Ref: Technical Certification)
  • •Clause-by-Clause Technical Commentary:

    The Bidder shall provide a Clause-by-Clause Technical Commentary addressing every requirement in the technical specification.

    (Ref: Clause-by-Clause Technical Commentary)
  • •Safety Data Sheets (MSDS) and Product Descriptive Literature:

    The Bidder must submit Material Safety Data Sheets (MSDS) and Product Descriptive Literature for all grades.

    (Ref: Safety Data Sheets (MSDS) and Product Descriptive Literature)
  • •Refining Flow Chart :

    The Bidder shall provide a Refining Flow Chart to ensure the process is non-recycled and non-blended with low-quality oils.

    (Ref: Refining Flow Chart )
  • •Drum Material Test Report :

    The Bidder must submit a Drum Material Test Report certifying steel thickness of minimum 0.7mm.

    (Ref: Drum Material Test Report )
  • •Marking Sample :

    The Bidder must submit a Marking Sample (Fundamental) photo showing Drum Markings (Weight, Manufacturer, Batch No, Contract No).

    (Ref: Marking Sample )
  • •Freshness Certification:

    The Bidder shall provide a Freshness Certification guaranteeing asphalt is not more than 6 months old at time of shipment.

    (Ref: Freshness Certification)
  • • Local Testing Acceptance letter :

    The Bidder must submit a Local Testing Acceptance letter specifically agreeing to final confirmation tests in Addis Ababa.

    (Ref: Local Testing Acceptance letter )
  • •Drum Quality Guarantee and Pre-delivery Inspection (PDI) :

    The Bidder shall provide a Drum Quality Guarantee and Pre-delivery Inspection (PDI) Consent.

    (Ref: Drum Quality Guarantee and Pre-delivery Inspection (PDI) )
  • • Properties : The entire required asphalt grade designated shall conform to the specification requirements shown in the table 1, 2, 3, 4, 5,6 and 7 (Ref: 1)
  • •Packing :

    It shall be packed in clean, rust-free steel drums, of minimum6-7mm thickness throughout,

    The Net weight of Min. 180 & Max. 220 kg

    Drums shall be marked at least with the following:

    Description & grade of the asphalt

    Gross weight

    Net weight of the asphalt

    Name of manufacturer

    Date of packing

    (Ref: 1)
  • •Packing (Fundamental):

    Asphalt shall be packed in clean, rust free steel drums, of at least 0.7 mm thickness throughout and Having net weight of 180 kg to 220 kg

    - Drums shall be leak-proof, strong enough to resist impacts and free from Distortions/deformations in the forms of dents, ingress or outguess. Objection ab *e surface

    Each Barrel shall be properly and indelibly marked with the following:-

    -Description and grade of the designated asphalt

    -Gross weight

    -Net weight of the asphalt

    -Name of the manufacturer

    -Name and address of the purchaser

    -contract number

    -The lot or batch number

    -Date of packing

    - Pre-delivery inspection of the drums shall be carried out in order to ascertain the conformance of the packing to the above requirements

    - Drums which do not comply with the aforementioned requirements shall be totally rejected

    - ERA also reserves the right to claim for complete replacement of the drum and its contents, in case of failure of the packing requirements as descried above, during storage within the warranty period

    (Ref: 1)
  • •Written Power of Attorney of the Signatory of the Bid:

    Bidder MUST submit a written power of attorney of the signatory of the bid, granting the agent the authority to sign contracts and submit bids on behalf of the manufacturer/international company (if applicable). 

    (Ref: 1)
  • •Submission of Descriptive Technical Literature:

    •Bidder MUST submit comprehensive descriptive technical literature for the offered product.  

    (Ref: 2)

FinancialQualification

  • •Financial Resources:

    "The Bidder must demonstrate access to, or availability of, financial resources such as liquid assets, unencumbered real assets, lines of credit, and other financial means, other than any contractual advance payments to meet the following cash-flow requirement: "

    (Ref: ITB 35.5(a))
  • •Historical Financial Performance:

    "Submission of audited balance sheets and other financial statements as required in the BDS Clause 17, for the last years to demonstrate the current soundness of the Bidder's financial position and its prospective long term profitability"

    (Ref: 1)
  • •External Audit Reports:

    Bidder MUST submit external audit reports (not financial statements) certified by an independent auditor for the last Two (2) Years. For Ethiopian Bidders, the audit reports MUST be prepared by certified auditors (not accountants or accounting firms).  

    (Ref: 1)
  • •Average Annual Turnover:

    Bidders need to demonstrate an average annual turnover of at least this amount, usually over the last three years, to meet this financial qualification criterion must be an average of 2,575,090 USD or 400,000,000 (Four Hundered Million) Ethiopian Birr or other similar amount of freely Convertible Foreign Currency.

    (Ref: ITB 35.5(c))

Bid Security

Amount: 300000 ETB

Foreign Bidders Form: CPO, Bank_Guarantee, Bank/Wire Transfer

Local Bidders Form: CPO, Bank_Guarantee, Bank/Wire Transfer

Terms and Conditions

Ethiopian roads administration reserve's the right to cancel the bid fully or partial
Save Tender